移动式火驱电点火器配套起下装备的研制

doi:10.3969/j.issn.1006-6535.2021.01.025

特种油气藏 ›› 2021, Vol. 28 ›› Issue (1): 170-174.DOI: 10.3969/j.issn.1006-6535.2021.01.025

• 钻采工程 • 上一篇

移动式火驱电点火器配套起下装备的研制

杨显志

中国石油辽河油田分公司,辽宁盘锦 124010

收稿日期:2019-10-23 修回日期:2020-10-24 出版日期:2021-02-25 发布日期:2021-04-27
作者简介:杨显志(1981—),男,高级工程师,2007年毕业于大庆石油学院热能工程专业,现从事稠油火驱钻采工艺技术研究工作。
基金资助:
“十三五”国家重大科技攻关示范项目“辽河、新疆稠油/超稠油开发技术示范工程”(2016ZX05055);辽宁省兴辽英才计划项目“厚状油层火驱点火关键技术研究”(XLYC1807147)

Development of the Equipment Supporting Mobile Electric Igniter Trip in Fire Flooding

Yang Xianzhi

Liaohe Oilfield Company, PetroChina, Panjin, Liaoning 124010, China

Received:2019-10-23 Revised:2020-10-24 Online:2021-02-25 Published:2021-04-27

摘要/Abstract

摘要： 火驱是稠油油藏有效的开发方式之一,油层点火是火驱成功的前提。针对传统连续管车在移动式火驱电点火作业中存在占井周期长、运行成本高等问题,研制了橇装移动式电点火器配套起下装备。该装备主要由可拆卸滚筒橇、打开式注入头橇组成,可在连续管不被截断的情况下,将作业橇组移动至其他井组进行电点火器的起下作业。现场应用效果表明:该装备可满足多口井同步点火需求,具有利用率高、适用性强的特点,单井点火运行成本降低60%以上。该技术可为火驱的大规模实施提供技术支持。

关键词: 移动式电点火器, 可拆卸滚筒橇, 打开式注入头橇, 同步点火, 火驱

Abstract: Fire flooding is one of the most effective development methods for heavy oil fields, and oil layer ignition is a prerequisite for successful fire flooding. The mobile electric ignition operation of traditional coiled tube vehicles has problems such as long well occupation period and high operating cost during fire flooding. In response to these problems, skid-mounted equipment was developed to support electric igniter trip. The equipment is mainly composed of a detachable roller skid and an open injection head skid, which can move the work skid group to other well groups for the operation of electric igniter trip without cut off the coiled tube. The field application results show that the equipment can meet the simultaneous ignition requirements of multiple wells, with high utilization rate and strong applicability, and the operation cost for single well ignition is reduced by more than 60%. This technology can provide a technical support for the large-scale implementation of fire flooding.

Key words: mobile electric igniter, detachable roller skid, open injection head skid, simultaneous ignition, fire flooding

中图分类号:

TE934

杨显志. 移动式火驱电点火器配套起下装备的研制[J]. 特种油气藏, 2021, 28(1): 170-174.

Yang Xianzhi. Development of the Equipment Supporting Mobile Electric Igniter Trip in Fire Flooding[J]. Special Oil & Gas Reservoirs, 2021, 28(1): 170-174.

参考文献

[1] 王元基,何江川,廖广志,等.国内火驱技术发展历程与应用前景[J].石油学报,2012,33(5):909-914.
WANG Yuanji,HE Jiangchuan,LIAO Guangzhi,et al.Overview on the development history of combustion drive and its application prospect in China[J].Acta Petrolei Sinica,2012,33(5):909-914.
[2] 柴利文,金兆勋.中深厚层稠油油藏火烧油层试验研究[J].特种油气藏,2010,17(3):67-70.
CHAI Liwen,JIN Zhaoxun.Pilot study of in situ combustion for mid-deep thick heavy oil reservoir[J].Special Oil & Gas Reservoirs,2010,17(3):67-70.
[3] 李迎春,邱国清,袁明琦,等.乐安油田南区火烧驱油提高采收率试验[J].油气地质与采收率,2002,9(4):72-74.
LI Yingchun,QIU Guoqing,YUAN Mingqi,et al.EOR experiment of in-situ combustion in southarea of Lean Oilfield[J].Petroleum Geology and Recovery Efficiency,2002,9(4):72-74.
[4] 韩冠永.杜66块火烧油层预热点火技术实验研究与应用[D].大庆:东北石油大学,2016.
HAN Guanyong.Research and application of in-situ combustion peheating ignition experment in Block Du66[D].Daqing:Northeast Petroleum University,2016.
[5] 袁士宝,蒋海岩,王丽,等.稠油油藏蒸汽吞吐后转火烧油层适应性研究[J].新疆石油地质,2013,34(3):303-306.
YUAN Shibao,JIANG Haiyan,WANG Li,et al.Research on adaptability to in-situ combustion in heavy oil reservoir after steam huff and puff[J].Xinjiang Petroleum Geology,2013,34(3):303-306.
[6] 刑景奎,苗崇良.高3-6-18块火驱采油数值模拟研究[J].特种油气藏,2009,16(3):62-64.
XING Jingkui,MIAO Chongliang.Numerical simulation study of fire flood for Gao 3-6-18 Block[J].Special Oil & Gas Reservoirs,2009,16(3):62-64.
[7] 舒华文,田相雷,蒋海岩,等.火烧油层点火方式研究[J].内蒙古石油化工,2010,36(21):5-8.
SHU Huawen,TIAN Xianglei,JIANG Haiyan,et al.Study on the little firing-way of oil-fired layer[J].Inner Mongolia Petroleum Chemistry,2010,36(21):5-8.
[8] 袁士宝,孙希勇,蒋海岩,等.火烧油层点火室内实验分析及现场应用[J].油气地质与采收率,2012,19(4):53-56.
YUAN Shibao,SUN Xiyong,JIANG Haiyan,et al.Ignition experimental analysis of in-situ combustion under conditions of preheating[J].Petroleum Geology and Recovery Efficiency,2012,19(4):53-56.
[9] 刘利,杨志祥,杨显志,等.直井火驱移动式电点火技术研究[J].特种油气藏,2014,21(6):130-132.
LIU Li,YANG Zhixiang,YANG Xianzhi,et al.Mobile electric ignition in fire-flooding[J].Special Oil & Gas Reservoirs,2014,21(6):130-132.
[10] 王海涛,周汉鹏,曹元,等.车载一体化火驱点火装置研制与应用[J].石油矿场机械,2016,45(12):74-78.
WANG Haitao,ZHOU Hanpeng,CAO Yuan,et al.Development and application of yehicle-mounted intedrated device for fire fiooding ignition[J].Oil Field Equipment,2016,45(12):74-78.
[11] 蒋海岩,李向鹏,刘文强,等.用于火烧油层的可丢弃式点火装置的设计[J].辽宁石油化工大学学报,2019,39(4):47-51.
JIANG Haiyan,LI Xiangpeng,LIU Wenqiang,et al.A design of droppable ignition device for in-situ combustion[J].Journal of Liaoning Shihua University,2019,39(4):47-51.
[12] 唐崇健,蔡如明,陈大勇.矿物绝缘电缆的生产工艺[J].电线电缆,2006,49(5):12-18.
TANG Congjian,CAI Ruming,CHEN Dayong.The manufacturing process for mineral insulated cables[J].Electric Wire and Cable,2006,49(5):12-18.
[13] 贺会群,李相方,熊革,等.CT38连续管作业车研制与应用[J].石油机械,2008,36(3):1-4.
HE Huiqun,LI Xiangfang,XIONG Ge,et al.Development and application of CT38 coiled tubing unit[J].China Petroleum Machinery,2008,36(3):1-4.
[14] 蔡罡,陈龙,坎尼扎提,等.火驱车载移动式电点火配套工艺设备研发[J].石油机械,2017,45(3):102-106,113.
CAI Gang,CHEN Long,KANNI Zhati,et al.Support technology of vehicle-mounted electronic ignition device for fire-flooding[J].China Petroleum Machinery,2017,45(3):102-106,113.
[15] 肖建秋,张燕萍,马青芳,等.连续管测井机滚筒总成结构设计[J].石油矿场机械,2009,38(9):55-58.
XIAO Jianqiu,ZHANG Yanping,MA Qingfang,et al.Structural design of reel used in coiled tubing logging unit[J].Oil Field Equipment,2009,38(9):55-58.

移动式火驱电点火器配套起下装备的研制

Development of the Equipment Supporting Mobile Electric Igniter Trip in Fire Flooding

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	杨洪, 苏日古, 陈莉娟, 王旭生, 陈龙, 潘竟军, 郭勇. 火驱原油活性氢组分变化规律认识[J]. 特种油气藏, 2022, 29(6): 127-132.
[2]	于雪峰. 基于数值模拟的重力火驱特征分析与调控[J]. 特种油气藏, 2022, 29(5): 88-93.
[3]	赵帅, 蒲万芬, 冯天, 王文科, 李一波. 超稠油低温氧化和裂解成焦实验[J]. 特种油气藏, 2022, 29(3): 69-75.
[4]	刘其成, 闫红星, 杨俊印, 程海清, 董晓东. 稠油油藏火驱取心井高温氧化区带识别方法[J]. 特种油气藏, 2022, 29(3): 76-83.
[5]	韩晓强, 李枭, 彭小强, 汝灿东, 张继周, 史浩, 李忠权. 稠油火驱过渡金属钴盐催化氧化实验[J]. 特种油气藏, 2022, 29(2): 135-140.
[6]	刘茜. 厚层稠油油藏直平组合火驱机理研究与试验[J]. 特种油气藏, 2022, 29(1): 128-133.
[7]	户昶昊. 火驱高温与低温氧化转换界限研究[J]. 特种油气藏, 2021, 28(5): 86-92.
[8]	王泰超, 朱国金, 谭先红, 王凯, 谢昊君. 基于稠油火驱机理改进的数值模拟方程[J]. 特种油气藏, 2021, 28(5): 100-106.
[9]	刘其成, 闫红星, 杨俊印, 杨鹏成, 张崇刚. 稠油火驱产出流体色谱指纹特征燃烧状态判识方法[J]. 特种油气藏, 2021, 28(5): 140-145.
[10]	张方礼, 户昶昊, 马宏斌, 史海涛, 张洪宝. 辽河油田火驱开发技术进展[J]. 特种油气藏, 2020, 27(6): 12-19.
[11]	关文龙, 宫宇宁, 唐君实, 宋扬, 李秋. 多层油藏火驱开发模式探讨[J]. 特种油气藏, 2020, 27(6): 60-66.
[12]	才业. 水淹稠油油藏火驱开发受效特征研究[J]. 特种油气藏, 2020, 27(5): 125-131.
[13]	冷冰. 火驱同心双管分层注气管柱研制及试验[J]. 特种油气藏, 2020, 27(4): 149-155.
[14]	王泰超, 朱国金, 王凯, 谭先红, 郑伟 . 海上稠油油藏多元热流体吞吐后转火驱开发研究 [J]. 特种油气藏, 2019, 26(5): 100-105.
[15]	王伟伟. 火驱油墙技术界限判定及运移特征[J]. 特种油气藏, 2019, 26(4): 131-.