[1] 黄熠,杨进,施山山,等.控压钻井技术在海上超高温高压井中的应用[J].石油钻采工艺,2018,40(6):699-705. HUANG Yi,YANG Jin,SHI Shanshan,et al.Applications of MPD technology in offshore ultra-HTHP wells[J].Oil Drilling & Production Technology,2018,40(6):699-705. [2] 黄熠,杨进,胜亚楠,等.莺琼盆地高温高压钻井工程风险定量评价方法[J].中国海上油气,2019,31(4):119-124. HUANG Yi,YANG Jin,SHENG Ya'nan,et al.Drilling engineering risk quantitative assessment for HTHP exploration wells in Yingqiong Basin[J].China Offshore Oil and Gas,2019,31(4):119-124. [3] AHMADI M A.Toward reliable model for prediction drilling fluid density at wellbore conditions:a LSSVM model[J].Neurocomputing,2016,211(26):143-149. [4] 杨谋,孟英峰,李皋,等.钻井全过程井筒-地层瞬态传热模型[J].石油学报,2013,34(2):170-175. YANG Mou,MENG Yingfeng,LI Gao,et al.A transient heat transfer model of wellbore and formation during the whole drilling process[J].Acta Petrolei Sinica,2013,34(2):170-175. [5] ZHANG R,LI J,LIU G,et al.Analysis of coupled wellbore temperature and pressure calculation model and influence factors under multi-pressure system in deep-water drilling[J].Energies,2019,12(18):3533-3560. [6] 赵胜英,鄢捷年,李怀科,等.高温深井钻井液当量循环密度预测模型[J].钻井液与完井液,2009,26(2):30-34. ZHAO Shengying,YAN Jienian,LI Huaike,et al.A prediction model for drilling fluid ECD in high temperature deep wells[J].Drilling Fluid & Completion Fluid,2009,26(2):30-34. [7] 罗洪斌,田波,蒋世全,等.考虑海底增压的深水钻井当量循环密度预测方法[J].石油钻采工艺,2015,37(1):72-75. LUO Hongbin,TIAN Bo,JIANG Shiquan,et al.Prediction method for equivalent circulating density of deepwater drilling when subsea pressurization is considered[J].Oil Drilling & Production Technology,2015,37(1):72-75. [8] 杨雪山,李胜,鄢捷年,等.水平井井筒温度场模型及ECD的计算与分析[J].钻井液与完井液,2014,31(5):63-66. YANG Xueshan,LI Sheng,YAN Jienian,et al.Temperature pattern modelling and calculation and analysis of ECD for horizontal wellbore[J].Drilling Fluid & Completion Fluid,2014,31(5):63-66. [9] 骆奎栋,李军,任美鹏,等.深水钻井隔水管增压管线对井筒温度的影响[J].石油机械,2019,47(2):53-58. LUO Kuidong,LI Jun,REN Meipeng,et al.Effect of boost line in riser on the wellbore temperature in deep water drilling[J].China Petroleum Machinery,2019,47(2):53-58. [10] 夏环宇,翟应虎,安岩,等.深水钻井隔水管增压排量对井筒温度分布的影响[J].石油钻探技术,2012,40(1):32-36. XIA Huanyu,ZHAI Yinghu,AN Yan,et al.The effect of boost flow in riser on the wellbore temperature in deep water drilling[J].Petroleum Drilling Techniques,2012,40(1):32-36. [11] LI G,YANG M,MENG Y F,et al.Transient heat transfer models of wellbore and formation systems during the drilling process under well kick conditions in the bottom-hole[J].Applied Thermal Engineering,2016,93:339-347. [12] ELKATATNY S.Real-time prediction of rheological parameters of KCL water-based drilling fluid using artificial neural networks[J].Arabian Journal for Science & Engineering,2017,42(4):1-11. [13] 杨宏伟,李军,柳贡慧,等.深水多梯度钻井井筒温度场[J].中国石油大学学报(自然科学版),2020,44(5):62-69. YANG Hongwei,LI Jun,LIU Gonghui,et al.Wellbore temperature profiling for deepwater multi-gradient drilling[J].Journal of China University of Petroleum(Edition of Natural Sciences),2020,44(5):62-69. [14] 杨谋,孟英峰,李皋,等.基于比例积分控制原理预测钻井全过程原始地层温度的新方法研究[J].物理学报,2013,62(17):553-562. YANG Mou,MENG Yingfeng,LI Gao,et al.A new method of forecasting initial formation temperature during the whole drilling process based on proportional-integral control principle[J].Acta Physica Sinica,2013,62(17):553-562. |