特种油气藏 ›› 2021, Vol. 28 ›› Issue (1): 125-129.DOI: 10.3969/j.issn.1006-6535.2021.01.018

• 油藏工程 • 上一篇    下一篇

低渗透气藏水平井分段压裂分段优化方法研究

杨浩1, 李新发2, 陈鑫2, 陈晓毅2, 刘鹏2, 冯青1, 耿少阳3   

  1. 1.中海油田服务股份有限公司,天津 300450;
    2.中国石油玉门油田分公司,甘肃 酒泉 735000;
    3.成都理工大学,四川 成都 610000
  • 收稿日期:2020-02-19 修回日期:2020-11-12 出版日期:2021-02-25 发布日期:2021-04-27
  • 作者简介:杨浩(1984—),男,工程师,2007年毕业于大庆石油学院油气田开发工程专业,2010年毕业于东北石油大学油气田开发工程专业,获硕士学位,现从事低渗透储层改造方案研究工作。
  • 基金资助:
    国家自然科学基金“页岩储层纳米孔隙结构表征及渗流机理研究”(51674044)

Study on Staged Optimization Method of Staged Fracturing for Horizontal Wells in Low-permeability Gas Reservoir

Yang Hao1, Li Xinfa2, Chen Xin2, Chen Xiaoyi2, Liu Peng2, Feng Qing1, Geng Shaoyang3   

  1. 1. China Oilfield Services Limited, Tianjin 300450, China;
    2. PetroChina Yumen Oilfield Company, Jiuquan, Gansu 735000, China;
    3. Chengdu University of Technology, Chengdu, Sichuan 610000, China
  • Received:2020-02-19 Revised:2020-11-12 Online:2021-02-25 Published:2021-04-27

摘要: 水平井分段压裂已成为低渗透气藏高效开发的重要方式,针对储层非均质性强及天然裂缝分布复杂导致压裂效果差的问题,采用四维影像裂缝监测技术,建立了基于测录井曲线的应力薄弱识别方法,并引入应力薄弱发育评价参数Ktr,结合水平井段储层发育特征对分段参数进行优化,从而充分改造应力薄弱段。研究结果表明:在高于Ktr截取值的井段,四维影像监测出起裂的裂缝条数多于设计值,同时压裂后产能高于平均水平。因此,能够应用Ktr值结合水平井段储层发育特征优化水平井分段压裂间距,对改进低渗透气藏压裂段划分方法,提高改造效率与采收率具有重要作用。

关键词: 低渗透气藏, 水平井, 分段压裂, 钻时, 天然裂缝, 优化方法

Abstract: The staged fracturing in horizontal wells has become an important method for efficient development of low-permeability gas reservoirs. In view of the poor fracturing effect caused by high reservoir heterogeneity and complex distribution of natural fractures, the four-dimensional imaging technology for monitoring fractures was used to establish a weak stress identification method based on logging curve, the weak-stress development evaluation parameter Ktr was introduced and combined with the reservoir development characteristics of horizontal well to optimize the staged parameters, so as to fully stimulate the section with weak stress. The study results show that in the well section higher than the cutoff value of Ktr, the number of fractures detected by four-dimensional imaging was more than the design value, and the productivity after fracturing was higher than the average level. Therefore, the Ktr value can be used to optimize the staged fracturing interval of horizontal wells in combination with the reservoir development characteristics of the well section and to improve the effect of fracturing and stimulation. It plays an important role in improving the fracturing section division method of low-permeability gas reservoirs and improving the efficiency of stimulation and recovery.

Key words: low-permeability gas reservoir, horizontal well, staged fracturing, drilling time, natural fracture, optimization method

中图分类号: