Special Oil & Gas Reservoirs >

2021 , Vol. 28 >Issue 1: 170 - 174

DOI: https://doi.org/10.3969/j.issn.1006-6535.2021.01.025

Drilling & Production Engineering

Development of the Equipment Supporting Mobile Electric Igniter Trip in Fire Flooding

  • Yang Xianzhi
Expand
  • Liaohe Oilfield Company, PetroChina, Panjin, Liaoning 124010, China

Received date: 2019-10-23

  Revised date: 2020-10-24

  Online published: 2021-04-27

Fold

Abstract

Fire flooding is one of the most effective development methods for heavy oil fields, and oil layer ignition is a prerequisite for successful fire flooding. The mobile electric ignition operation of traditional coiled tube vehicles has problems such as long well occupation period and high operating cost during fire flooding. In response to these problems, skid-mounted equipment was developed to support electric igniter trip. The equipment is mainly composed of a detachable roller skid and an open injection head skid, which can move the work skid group to other well groups for the operation of electric igniter trip without cut off the coiled tube. The field application results show that the equipment can meet the simultaneous ignition requirements of multiple wells, with high utilization rate and strong applicability, and the operation cost for single well ignition is reduced by more than 60%. This technology can provide a technical support for the large-scale implementation of fire flooding.

Key words： mobile electric igniter; detachable roller skid; open injection head skid; simultaneous ignition; fire flooding

Cite this article

Yang Xianzhi . Development of the Equipment Supporting Mobile Electric Igniter Trip in Fire Flooding[J]. Special Oil & Gas Reservoirs, 2021 , 28(1) : 170 -174 . DOI: 10.3969/j.issn.1006-6535.2021.01.025

References

[1] 王元基,何江川,廖广志,等.国内火驱技术发展历程与应用前景[J].石油学报,2012,33(5):909-914.
WANG Yuanji,HE Jiangchuan,LIAO Guangzhi,et al.Overview on the development history of combustion drive and its application prospect in China[J].Acta Petrolei Sinica,2012,33(5):909-914.
[2] 柴利文,金兆勋.中深厚层稠油油藏火烧油层试验研究[J].特种油气藏,2010,17(3):67-70.
CHAI Liwen,JIN Zhaoxun.Pilot study of in situ combustion for mid-deep thick heavy oil reservoir[J].Special Oil & Gas Reservoirs,2010,17(3):67-70.
[3] 李迎春,邱国清,袁明琦,等.乐安油田南区火烧驱油提高采收率试验[J].油气地质与采收率,2002,9(4):72-74.
LI Yingchun,QIU Guoqing,YUAN Mingqi,et al.EOR experiment of in-situ combustion in southarea of Lean Oilfield[J].Petroleum Geology and Recovery Efficiency,2002,9(4):72-74.
[4] 韩冠永.杜66块火烧油层预热点火技术实验研究与应用[D].大庆:东北石油大学,2016.
HAN Guanyong.Research and application of in-situ combustion peheating ignition experment in Block Du66[D].Daqing:Northeast Petroleum University,2016.
[5] 袁士宝,蒋海岩,王丽,等.稠油油藏蒸汽吞吐后转火烧油层适应性研究[J].新疆石油地质,2013,34(3):303-306.
YUAN Shibao,JIANG Haiyan,WANG Li,et al.Research on adaptability to in-situ combustion in heavy oil reservoir after steam huff and puff[J].Xinjiang Petroleum Geology,2013,34(3):303-306.
[6] 刑景奎,苗崇良.高3-6-18块火驱采油数值模拟研究[J].特种油气藏,2009,16(3):62-64.
XING Jingkui,MIAO Chongliang.Numerical simulation study of fire flood for Gao 3-6-18 Block[J].Special Oil & Gas Reservoirs,2009,16(3):62-64.
[7] 舒华文,田相雷,蒋海岩,等.火烧油层点火方式研究[J].内蒙古石油化工,2010,36(21):5-8.
SHU Huawen,TIAN Xianglei,JIANG Haiyan,et al.Study on the little firing-way of oil-fired layer[J].Inner Mongolia Petroleum Chemistry,2010,36(21):5-8.
[8] 袁士宝,孙希勇,蒋海岩,等.火烧油层点火室内实验分析及现场应用[J].油气地质与采收率,2012,19(4):53-56.
YUAN Shibao,SUN Xiyong,JIANG Haiyan,et al.Ignition experimental analysis of in-situ combustion under conditions of preheating[J].Petroleum Geology and Recovery Efficiency,2012,19(4):53-56.
[9] 刘利,杨志祥,杨显志,等.直井火驱移动式电点火技术研究[J].特种油气藏,2014,21(6):130-132.
LIU Li,YANG Zhixiang,YANG Xianzhi,et al.Mobile electric ignition in fire-flooding[J].Special Oil & Gas Reservoirs,2014,21(6):130-132.
[10] 王海涛,周汉鹏,曹元,等.车载一体化火驱点火装置研制与应用[J].石油矿场机械,2016,45(12):74-78.
WANG Haitao,ZHOU Hanpeng,CAO Yuan,et al.Development and application of yehicle-mounted intedrated device for fire fiooding ignition[J].Oil Field Equipment,2016,45(12):74-78.
[11] 蒋海岩,李向鹏,刘文强,等.用于火烧油层的可丢弃式点火装置的设计[J].辽宁石油化工大学学报,2019,39(4):47-51.
JIANG Haiyan,LI Xiangpeng,LIU Wenqiang,et al.A design of droppable ignition device for in-situ combustion[J].Journal of Liaoning Shihua University,2019,39(4):47-51.
[12] 唐崇健,蔡如明,陈大勇.矿物绝缘电缆的生产工艺[J].电线电缆,2006,49(5):12-18.
TANG Congjian,CAI Ruming,CHEN Dayong.The manufacturing process for mineral insulated cables[J].Electric Wire and Cable,2006,49(5):12-18.
[13] 贺会群,李相方,熊革,等.CT38连续管作业车研制与应用[J].石油机械,2008,36(3):1-4.
HE Huiqun,LI Xiangfang,XIONG Ge,et al.Development and application of CT38 coiled tubing unit[J].China Petroleum Machinery,2008,36(3):1-4.
[14] 蔡罡,陈龙,坎尼扎提,等.火驱车载移动式电点火配套工艺设备研发[J].石油机械,2017,45(3):102-106,113.
CAI Gang,CHEN Long,KANNI Zhati,et al.Support technology of vehicle-mounted electronic ignition device for fire-flooding[J].China Petroleum Machinery,2017,45(3):102-106,113.
[15] 肖建秋,张燕萍,马青芳,等.连续管测井机滚筒总成结构设计[J].石油矿场机械,2009,38(9):55-58.
XIAO Jianqiu,ZHANG Yanping,MA Qingfang,et al.Structural design of reel used in coiled tubing logging unit[J].Oil Field Equipment,2009,38(9):55-58.
Options
Outlines

/

〈 〉