For low-permeability sandstone reservoirs with poor reservoir physical properties and strong heterogeneity, it is easy to form ineffective water injection cycle in the dominant injection-production direction in the moderate and high water-cut stages, resulting in low utilization of injected water and poor development effect. Therefore, based on the similar principle of seepage mechanics and hydroelectricity of the well group and the dynamic monitoring data acquired in the development process, a weighted calculation method was established to split the water injection rate in the longitudinal and planar directions. Three parameters, cumulative water intake rate per unit oil layer thickness in the injection-production direction, cumulative water intake ratio in the injection-production direction and water intake volume in the injection-production direction, were constrained to determine the quantitative characterization parameters on the plane in the dominant injection-production direction and their differentiation standard. The application proved that the quantitative characterization technology of the dominant injection-production direction had significant effect the fine water injection control in the ultra-high water-cut stage. After the water injection control of 177 wells, the water injection rate was reduced by 3 115 m3/d in the dominant injection-production direction and increased by 5 376 m3/d in the low water absorption direction, and the proportion of ineffective water injection decreased from about 20% to less than 10%. This study plays a guiding role in fine water injection control and remaining oil exploitation in the same reservoir.
[1] 盖德林,刘春天,贾振岐.注采井间水流优势方向的识别[J].大庆石油学院学报,2007,31(5): 47-50.
GAI Delin,LIU Chuntian,JIA Zhenqi.Recognition of dominant water flowing direction between injectors and producers[J].Journal of Daqing Petroleum Institute,2007,31(5):47-50.
[2] 王祥,夏竹君,张宏伟,等.利用注水剖面测井资料识别大孔道的方法研究[J].测井技术,2002,26(2):162-164.
WANG Xiang,XIA Zhujun,ZHANG Hongwei.Using injection profile log data to distinguish macropore formation[J].Well Logging Technology,2002,26(2):162-164.
[3] 王森,冯其红,宋玉龙,等.基于吸水剖面资料的优势通道分类方法——以孤东油田为例[J].油气地质与采收率,2013,20(5):99-102.
WANG Sen,FENG Qihong,SONG Yulong,et al.Preferential flow path classification method based on injection profile data: taking Gudong Oilfield as an example[J].Petroleum Geology and Recovery Efficiency,2013,20(5):99-102.
[4] 赵国瑜.井间示踪技术在油田生产中的应用[J].石油勘探与开发,1998,26(4):92-95.
ZHAO Guoyu.The application of interwell tracer method in oilfield production[J].Petroleum Exploration and Development,1998,26(4):92-95.
[5] 汪玉琴,陈方鸿,顾鸿君,等.利用示踪剂研究井间水流优势通道[J].新疆石油地质,2011,32(5):512-514.
WANG Yuqin,CHEN Fanghong,GU Hongjun,et al.Using tracer to study interwell water flow predominant channel[J].Xinjiang Petroleum Geology,2011,32(5):512-514.
[6] 刘洪.优势渗流通道的试井解释方法研究[J].石油地质与工程,2015,29(2):98-100.
LIU Hong.Well testing interpretation method research of preferential seepage channels[J].Petroleum Geology & Engineering,2015,29(2):98-100.
[7] 刘淑芬,梁继德.试井技术识别无效注采水循环通道方法探讨[J].油气井测试,2004,13(1):27-30.
LIU Shufen,LIANG Jide.Discussion for an approach to specifying injection and recovery cyclic channel by well testing technology[J].Well Testing,2004,13(1):27-30.
[8] 孙明,李治平.注水开发砂岩油藏优势渗流通道识别与描述技术[J].新疆石油天然气,2009,16(1):50-52.
SUN Ming,LI Zhiping.Identification and description of preferential path for water-flooding sandstone reservoir[J].Xinjiang Oil & Gas,2009,16(1):50-52.
[9] 巴忠臣.水驱砂岩油藏优势渗流通道识别研究[D].青岛:中国石油大学(华东),2014.
BA Zhongchen.Study on the Identification of preferential percolation path for water flooding sandstone reservoir[D].Qingdao:China University of Petroleum (East China),2014.
[10] 李振.注水开发油藏优势渗流通道识别——以渤中34-1油田为例[D].成都:西南石油大学,2018.
LI Zhen.Identification of dominant seepage channels in water-flooding development reservoirs:taking Bozhong 34-1 Oilfield as an example [D].Chengdu:Southwest Petroleum University,2018.
[11] 龙明,徐怀民,陈玉琨.结合相对渗透率曲线的KHK产量劈分方法研究[J].石油天然气学报,2012,34(4):114-118.
LONG Ming,XU Huaimin,CHEN Yukun.KHK production splitting method combined with relative permeability curve[J].Journal of Oil and Gas Technology,2012,34(4):114-118.
[12] 李凤琴,刘丽琼,丁全胜,等.分层累计吸水量劈分方法研究[J].河南石油,2005,19(5):28-32.
LI Fengqin,LIU Liqiong,DING Quansheng,et al.A study on calculation of accumulative water-intake rate of separate layer[J].Petroleum Geology and Engineering,2005,19(5):28-32.
[13] 杨超,许晓明,齐梅,等.高含水老油田注采连通判别及注水量优化方法[J].中南大学学报(自然科学版), 2015,46(12):4592-4601.
YANG Chao,XU Xiaoming,QI Mei,et al.Injector-producer connectivity identification and water injection optimization of mature oil fields in high water cut period[J].Journal of Central South University(Science and Technology),2015,46(12):4592-4601.
[14] 刘义坤,唐慧敏,梁爽,等.薄差层极限注采井距求解新方法探讨[J].特种油气藏,2014,21(3):75-78.
LIU Yikun,TANG Huimin,LIANG Shuang,et al.New solution to critical injector-producer spacing for thin and poor reservoirs[J].Special Oil & Gas Reservoirs,2014,21(3):75-78.
[15] 雍锐,常程,张德良,等.地质工程经济一体化页岩气水平井井距优化——以国家级页岩气开发示范区宁209井区为例[J].天然气工业, 2020, 40(7): 42-48.
YONG Rui,CHANG Cheng,ZHANG Deliang,et al.Optimization of shale-gas horizontal well spacing based on geology-engineering-economy integration:a case study of Well Block Ning 209 in the national shale gas development demonstration area[J].Natural Gas Industry,2020,40(7):42-48.
[16] 李金志.胜利油田低渗透油藏CO2混相驱合理注采井距研究[J].油气地质与采收率,2020,27(3):64-69.
LI Jinzhi.Reasonable well spacing for CO2 miscible flooding in low-permeability reservoirs of Shengli Oilfield[J].Petroleum Geology and Recovery Efficiency,2020,27(3):64-69.
[17] 卢川,郑强,朱国金,等.双水平井蒸汽辅助重力泄油合理井距优选[J].油气地质与采收率,2019,26(5):107-111.
LU Chuan,ZHENG Qiang,ZHU Guojin,et al.Reasonable well spacing optimization for double horizontal wells in process of steam-assisted gravity drainage[J].Petroleum Geology and Recovery Efficiency,2019,26(5):107-111.
