In order to fully understand the conditions of tight conglomerate reservoir in the Mahu Oilfield, reduce the interference of inter-well fractures, achieve precise fracturing and complete productivity prediction, a three-dimensional numerical model was established with the simulation of geology, in-situ stress, and fracturing coupling. Taking the experimental area of the Mahu tight oil reservoir as an example, a single well in-situ stress model was completed according to the existing geological data, an accurate three-dimensional in-situ stress model was established on the in-situ stress model, and an artificial fracture model was loaded. With the coupled fracturing model, the rule of in-situ stress changing with time and space after the fracturing was completed in the study area was analyzed and compared with the artificial fracture morphology under static geological conditions. It was found in the study that the production indicators obtained by fitting the three-dimensional numerical model were highly accurate, with practical significance. The three-dimensional numerical model was used to obtain the engineering parameters of Well X in the experimental area of the Mahu tight oil reservoir. After the reservoir was put into production, the average daily oil produced was 23.4 t/d within 300 days, the average oil pressure was 22.3 MPa, and the stable production duration was long. This study will be in favor of optimizing the fracturing design and reducing the interference of stress shadow.
Lu Wenting
,
Wang Liang
,
Yang Shengfeng
,
Liu Congping
,
Ma Junxiu
,
Tang Lin
,
Li Yunzhe
. Numerical Simulation on Fracturing in Tight Conglomerate Reservoir of Mahu Oilfield[J]. Special Oil & Gas Reservoirs, 2021
, 28(3)
: 94
-98
.
DOI: 10.3969/j.issn.1006-6535.2021.03.014
[1] 马旭,郝瑞芬,来轩昂,等.苏里格气田致密砂岩气藏水平井体积压裂矿场试验[J].石油勘探与开发,2014,41(6):742-747.
MA Xu,HAO Ruifen,LAI Xuan'ang,et al.Field test of volume fracturing for horizontal wells in Sulige tight sandstone gas reservoirs[J].Petroleum Exploration and Development,2014,41(6):742-747.
[2] 雷群,管保山,才博,等.储集层改造技术进展及发展方向[J].石油勘探与开发,2019,46(3):580-587.
LEI Qun,GUAN Baoshan,CAI Bo,et al.Technological progress and prospects of reservoir stimulation[J].Petroleum Exploration and Development,2019,46(3):580-587.
[3] 陈作,薛承瑾,蒋廷学,等.页岩气井体积压裂技术在我国的应用建议[J].天然气工业, 2010,30(10):30-32.
CHEN Zuo,XUE Chengjin,JIANG Tingxue,et al.Proposals for the application of fracturing by stimulated reservoir volume (SRV) in shale gas wells in China[J].Natural Gas Industry,2010,30(10):30-32.
[4] 王永辉,卢拥军,李永平,等.非常规储层压裂改造技术进展及应用[J].石油学报,2012,33(增刊1):149-158.
WANG Yonghui,LU Yongjun,LI Yongping,et al.Progress and application of hydraulic fracturing technology in unconventional reservoir[J].Acta Petrolei Sinica,2012,33(S1):149-158.
[5] 陈新安.页岩气水平井分段压裂微地震监测认识及应用[J].特种油气藏,2017,24(1):170-174.
CHEN Xin'an.Understanding and application of microseism monitoring over staged fracturing in horizontal wells for shale gas development[J].Special Oil & Gas Reservoirs,2017,24(1):170-174.
[6] 许江文,李建民,邬元月,等.玛湖致密砾岩油藏水平井体积压裂技术探索与实践[J].中国石油勘探,2019,24(2):241-249.
XU Jiangwen,LI Jianmin,WU Yuanyue,et al.Exploration and practice of volume fracturing technology in horizontal well of Mahu tight conglomerate reservoirs[J].China Petroleum Exploration,2019,24(2):241-249.
[7] 赵金洲,彭瑀,林啸,等.考虑复杂应力分布的数值缝宽计算模型及其应用[J].石油学报,2016,37(7):914-920.
ZHAO Jinzhou,PENG Yu,LIN Xiao,et al.Numerical fracture width model considering complex stress distribution and its application[J].Acta Petrolei Sinica,2016,37(7):914-920.
[8] 雷群,胥云,蒋廷学,等.用于提高低—特低渗透油气藏改造效果的缝网压裂技术[J].石油学报,2009,30(2):237-241.
LEI Qun,XU Yun,JIANG Tingxue,et al.Fracture network fracturing technique for improving post-fracturing performance of low and ultra-low permeability reservoirs[J].Acta Petrolei Sinica,2009,30(2):237-241.
[9] 杨向同,郑子君,张杨,等.地质工程一体化在应力敏感型致密储层产能预测中的应用——以库车西部某区块为例[J].中国石油勘探,2017,22(1):61-74.
YANG Xiangtong,ZHENG Zijun,ZHANG Yang,et al.Application of geology-engineering integration in productivity prediction for stresssensitive tight reservoir:a case study of X block in western Kuqa[J].China Petroleum Exploration,2017,22(1):61-74.
[10] 王盼,刘挺,唐峰.基于Gardner公式的岩石密度优化算法[J].录井工程,2016,27(4):12-15.
WANG Pan,LIU Ting,TANG Feng.Rock density optimization algorithm based on Gardner formula[J].Mud Logging Engineering,2016,27(4):12-15.
[11] 周东红,熊晓军.一种高精度地层压力预测方法[J].石油地球物理勘探,2014,49(2):344-348.
ZHOU Donghong,XIONG Xiaojun.A method for high-precision prediction of formation pressure[J].Oil Geophysical Prospecting,2014,49(2):344-348.
