Drilling & Production Engineering

Wellbore Temperature Calculation Model for Horizontal Wells in Shallow Hydrate Reservoirs in Deep Water

  • Dong Shengwei ,
  • Wang Zijian ,
  • Cao Fei ,
  • Li Yingjie ,
  • Zhang Aixia ,
  • Cheng Wan
Expand
  • 1. Engineering Technology Institute Co., LTD. CNPC, Beijing 102206, China;
    2. Ocean Engineering Co., LTD. CNPC, Beijing 100028, China;
    3. China University of Geosciences (Wuhan), Wuhan, Hubei 430074, China

Received date: 2019-12-02

  Revised date: 2020-06-30

  Online published: 2022-02-18

Abstract

The development of hydrate reservoirs with horizontal wells has the characteristics of large producing range, high gas production rate, and high economic benefits. However, due to changes in downhole temperature, hydrates are prone to decompose during drilling, which induces instability of borehole wall. Based on the reservoir parameters and basic drilling parameters in the Shenhu area of the South China Sea, the heat transfer process in the wellbore during horizontal well drilling was studied, and the calculation model wellbore temperature profile during the mud circulation process was constructed. The influence law of displacement, density, initial temperature, and horizontal displacement of surface mud on wellbore temperature field was studied. The study finds that the mud injection displacement is the main factor that affects the temperature profile of the wellbore, while the mud density is the secondary factor. The greater the horizontal displacement, the more adequate the heat conduction between the mud and the formation in the wellbore. The research results can provide a reference basis for designing the mud parameters and designing well structure of horizontal wells in hydrate reservoirs in the Shenhu area of the South China Sea.

Cite this article

Dong Shengwei , Wang Zijian , Cao Fei , Li Yingjie , Zhang Aixia , Cheng Wan . Wellbore Temperature Calculation Model for Horizontal Wells in Shallow Hydrate Reservoirs in Deep Water[J]. Special Oil & Gas Reservoirs, 2020 , 27(5) : 157 -161 . DOI: 10.3969/j.issn.1006-6535.2020.05.024

References

[1] 张宇,赵林,王炳红,等.流-固-化-热耦合的陆相页岩井壁稳定力学模型及应用[J].特种油气藏,2019,26(3):163-168.
ZHANG Yu,ZHAO Lin,WANG Binghong,et al.Fluid-solid-chemical-thermal coupling mechanical model of wellbore stability for continental shale and its application[J].Special Oil & Gas Reservoirs,2019,26(3):163-168.
[2] RAMEY H J.Wellbore heat transmission[J].Journal of Petroleum Technology,1962,14(4):427-435.
[3] HASAN A R,KABIR C S,AMEEN M M.A fluid circulating temperature model for workover operations[J].SPE Journal,1996,1(2):133-144.
[4] GAO Y H,SUN B J,XU B Y,et al.A wellbore/formation-coupled heat-transfer model in deepwater drilling and its application in the prediction of hydrate-reservoir dissociation[J].SPE Journal,2017,22(3):756-766.
[5] ZHANG Z,XIONG Y M,MAO L J,et al.Transient temperature prediction models of wellbore and formation in well-kick condition during circulation stage[J].Journal of Petroleum Science and Engineering,2019,175:266-279.
[6] 杨谋,孟英峰,李皋,等.钻井全过程井筒-地层瞬态传热模型[J].石油学报,2013,34(2):366-371.
YANG Mou,MENG Yingfeng,LI Gao,et al.A transient heat transfer model of wellbore and formation during the whole drilling process[J].Acta Petrolei Sinica,2013,34(2):366-371.
[7] 宋洵成,管志川.深水钻井井筒全瞬态传热特征[J].石油学报,2011,32(4):704-708.
SONG Xuncheng,GUAN Zhichuan.Full transient analysis of heat transfer during drilling fluid circulation in deep-water wells[J].Acta Petrolei Sinica,2011,32(4):704-708.
Outlines

/