Special Oil & Gas Reservoirs >

2020 , Vol. 27 >Issue 4: 123 - 130

DOI: https://doi.org/10.3969/j.issn.1006-6535.2020.04.019

Reservoir Engineering

Properties and Oil Displacement Performance of Ternary Sulfonated Modified Polyacrylamide

  • Wu Peng ,
  • Zhang Yue ,
  • Niu Yuping ,
  • Jiang Ying
Expand
  • 1. Northeast Petroleum University, Daqing, Heilongjiang 163318, China;
    2. CNOOC (China) Tianjin Branch, Tianjin 300450, China;
    3. PetroChina Daqing Oilfield Company, Ltd, Daqing, Heilongjiang 163712, China;
    4. CNPC BGP INC., Daqing, Heilongjiang 163357, China

Received date: 2019-09-24

  Revised date: 2020-05-17

  Online published: 2022-02-18

Fold

Abstract

In order to improve the viscosity reduction of partial hydrolyzing polyacrylamides under high temperature and high salt condition, the ternary sulfonated modified polyacrylamide was synthesized by azo-redox compound initiation system. It also provided the structure characterization, property evaluation and oil displacement performance. Research indicates that the ternary sulfonated polyacrylamide molecules shows a long chain structure and the chains contact and intertwine with each other to form an irregular spatial 3D network structure. Comparing with the partial hydrolyzing polyacrylamides, the ternary sulfonated modified polyacrylamide is characterized by high viscosity, better temperature and salt resistance stability and viscoelasticity. The ternary sulfonated modified polyacrylamide indicates the maximum resistance factor and residual resistance factor, followed by comb polymer, and the partial hydrolyzing polyacrylamide indicates the minimum resistance factor and residual resistance factor. The oil displacement performance from high to low are ternary sulfonated modified polyacrylamide, comb polymer and partial hydrolyzing polyacrylamide. The recovery factor increasing rate of ternary sulfonated modified polyacrylamide decreases with the increase of concentration and temperature and the decrease of salinity. The research was applied to 13 oil production wells in the Block F30 of Shengli Oilfield. The daily oil production was enhanced to 5.2 t/d, the water cut was reduced to 90.4%, and the average cumulative oil increment per well was 685.3 t. This research is of great significance for improving economic benefits and guiding field practice in polymer flooding treatment.

Key words： temperature toleromue and salt resistance; ternary sulfonated modified polyacrylamide; viscoelasticity; seepage pattern; oil displacement performance; Block Gao25

Cite this article

Wu Peng , Zhang Yue , Niu Yuping , Jiang Ying . Properties and Oil Displacement Performance of Ternary Sulfonated Modified Polyacrylamide[J]. Special Oil & Gas Reservoirs, 2020 , 27(4) : 123 -130 . DOI: 10.3969/j.issn.1006-6535.2020.04.019

References

[1] 潘广明,张彩旗,刘东,等.海上稠油油藏弱凝胶调驱提高采收率技术[J].特种油气藏,2018,25(3):140-143.
PAN Guangming,ZHANG Caiqi,LIU Dong,et al.Weak gel profile control flooding to enhance oil recovery in offshore heavy oil reservoir[J].Special Oil & Gas Reservoirs,2018,25(3):140-143.
[2] 牛丽伟,李建冰,卢祥国,等.可动微凝胶油藏适应性及调驱机制[J].中国石油大学学报(自然科学版),2018,42(3):107-113.
NIU Liwei,LI Jianbing,LU Xiangguo,et al.Reservoir adaptability of soft microgel and its profile control mechanism[J].Journal of China University of Petroleum(Edition of Natrual Science),2018,42(3):107-113.
[3] 李宗阳,王业飞,曹绪龙,等.新型耐温抗盐聚合物驱油体系设计评价及应用[J].油气地质与采收率,2019,26(2):106-112.
LI Zongyang,WANG Yefei,CAO Xulong,et al.Design evaluation and application of a novel temperature-resistant and salt-tolerant polymer flooding system[J].Petroleum Geology and Recovery Efficiency,2019,26(2):106-112.
[4] 王增林,张民,杨勇,等.稠油热化学驱过程中影响因素及其交互作用对采收率的影响[J].油气地质与采收率,2017,24(1):64-68.
WANG Zenglin,ZHANG Min,YANG Yong,et al.Effect of influencing factors and their interaction on thermo-chemical recovery of heavy oil[J].Petroleum Geology and Recovery Efficiency,2017,24(1):64-68.
[5] 祝仰文.超高分三元共聚物流变特性及驱油性能[J].油气地质与采收率,2018,25(6):78-83.
ZHU Yangwen.Study on rheology and oil displacement properties of ultra high molecular weight terpolymer[J].Petroleum Geology and Recovery Efficiency,2018,25(6):78-83.
[6] 倪军,王成俊,高怡文.特低渗油藏表面活性剂驱潜力评价新模型[J].特种油气藏,2018,25(1):68-72.
NI Jun,WANG Chengjun,GAO Yiwen.A new evaluation model for the surfactant flooding potential in ultra-low permeability reservoir[J].Special Oil & Gas Reservoirs,2018,25(1):68-72.
[7] 雷锡岳,曲占庆,郝彤,等.聚合物驱后复合相态调驱体系提高采收率技术[J].特种油气藏,2018,25(2):143-147.
LEI Xiyue,QU Zhanqing,HAO Tong,et al.Composite profile-control flooding to enhance oil recovery after polymer flooding[J].Special Oil & Gas Reservoirs,2018,25(2):143-147.
[8] 未志杰,康晓东,何春百,等.海上稠油聚合物驱交替注入参数优化研究[J].特种油气藏,2018,25(1):78-84.
WEI Zhijie,KANG Xiaodong,HE Chunbai,et al.Alternating injection parameter optimization of polymer flooding in offshore heavy oil reservoir[J].Special Oil & Gas Reservoirs,2018,25(1):78-84.
[9] 钟会影,李园园,尹洪军,等.盲端孔道内黏弹性聚合物驱油两相渗流规律[J].特种油气藏,2019,26(1):100-105.
ZHONG Huiying,LI Yuanyuan,YIN Hongjun,et al.Two-phase fluid flow of viscoelastic polymer flooding in dead end channels[J].Special Oil & Gas Reservoirs,2019,26(1):100-105.
[10] 李红英,王欣然,陈善斌,等.层内夹层对海上聚合物驱油田剩余油分布影响[J].特种油气藏,2018,25(5):135-140.
LI Hongying,WANG Xinran,CHEN Shanbin,et al.Effect of intra-formational bed on the remaining oil distribution in offshore polymer flooding reservoir[J].Special Oil & Gas Reservoirs,2018,25(5):135-140.
[11] 王德民,程杰成,吴军政,等.聚合物驱油技术在大庆油田的应用[J].石油学报,2005,26(1):74-78.
WANG Demin,CHENG Jiecheng,WU Junzheng,et al.Application of polymer flooding technology in Daqing Oilfield[J].Acta Petrolei Sinica,2005,26(1):74-78.
[12] 王启民,冀宝发,隋军,等.大庆油田三次采油技术的实践与认识[J].大庆石油地质与开发,2001,20(2):45-56.
WANG Qimin,JI Baofa,SUI Jun,et al.Practice and knowledge of tertiary recovery technique in Daqing Oilfield[J].Petroleum Geology & Oilfield Development in Daqing,2001,20(2):45-56.
[13] 孙焕泉.胜利油田三次采油技术的实践与认识[J].石油勘探与开发,2006,33(3):262-266.
SUN Huanquan. Practice and understanding on tertiary recovery in Shengli Oilfield[J].Petroleum Exploration and Development,2006,33(3):262-266.
[14] 刘玉章.聚合物驱提高采收率技术[M].北京:石油工业出版社,2006:106-134.
LIU Yuzhang.Polymer flooding enhanced recovery technology[M].Beijing:Petroleum Industry Press,2006:106-134.
[15] 潘祖仁.高分子化学[M].北京:化学工业出版社,2007:99-100.
PAN Zuren.Polymer Chemistry[M].Beijing:Chemical Industry Press,2007:99-100.
[16] 牛丽伟,卢祥国,王晓燕,等.聚合物、聚表剂和Cr3+聚合物凝胶分子构型及其渗流特性差异[J].中国石油大学学报(自然科学版),2014,38(6):186-191.
NIU Liwei,LU Xiangguo,WANG Xiaoyan,et al.Differences in molecular configuration and seepage properties among polymer,active polymer and Cr3+ polymer gel[J].Journal of China University of Petroleum(Edition of Natrual Science),2014,38(6):186-191.
[17] 叶仲斌,苟光俊,苟绍华,等.丙烯酰胺四元共聚磺酸盐的合成及性能研究[J].化学研究与应用,2012,24(10):1560-1564.
YE Zhongbin,GOU Guangjun,GOU Shaohua,et al.Synthesis and properties for a acrylamide tetra-copolymer sulfonate[J].Chemical Research and Application,2012,24(10):1560-1564.
[18] 卢祥国,姜维东,王晓燕,等.Cr3+、碱和表面活性剂对聚合物分子构型及渗流特性影响[J].石油学报,2009,30(5):749-754.
LU Xiangguo,JIANG Weidong,WANG Xiaoyan.Study on effects of Cr3+,alkali and surfactant on polymer molecular configuration and seepage flow characteristics[J].Acta Petrolei Sinica,2009,30(5):749-754.
[19] 夏惠芬,王德民,刘中春,等.黏弹性聚合物溶液提高微观驱油效率的机理研究[J].石油学报,2001,22(4):60-65.
XIA Huifen,WANG Demin,LIU Zhongchun,et al.Study on the mechanism of polymer solution with visco-elastic behavior in-creasing microscopic oil displacement efficiency[J].Acta Petrolei Sinica,2001,22(4):60-65.
[20] 张晓华.阻力系数对聚合物驱油效果的影响[J].特种油气藏,2011,18(3):81-83.
ZHANG Xiaohua.Influence of resistance coefficient on polymer flooding effect[J].Special Oil & Gas Reservoirs,2011,18(3):81-83.
[21] 于涛,丁伟,罗洪君.油田化学剂[M].石油工业出版社,2002:61-62.
YU Tao,DING Wei,LUO Hongjun.Oilfield chemical[M].Beijing:Petroleum Industry Press,2002:61-62.
[22] 刘海滨,黄福堂.聚丙烯酰胺的性质及应用[J].国外油田工程,2001,17(9):53-54.
LIU Haibin,HUANG Futang.The properties and application of polyacrylamide[J].Foreign Oilfield Engineering,2001,17(9):53-54.
[23] 冯绪胜,刘洪国,郝京诚,等.胶体化学[M].北京:化学工业出版社,2005:50-57.
FENG Xusheng,LIU Hongguo,HAO Jingcheng,et al.Colloid chemistry[M].Beijing:Chemical Industry Press,2005:50-57.
[24] 高硕,柏明星.聚合物驱油微观渗流机理数值模拟研究[J].石油化工高等学校学报,2018,31(4): 42-45.
GAO Shuo,BAI Mingxing.Numerical simulation of polymer flooding mechanism in micropores[J]. Journal of Petrochemical Universities, 2018, 31(4):42-45.
[25] 李航,陈波.聚合物驱油中复配絮凝剂体系的优选及性能研究[J].石油化工高等学校学报, 2017,30(1):23-26.
LI Hang,CHEN Bo.Optimization and performance of combination flocculating system in polymer flooding[J].Journal of Petrochemical Universities, 2017, 30(1): 23-26.
[26] 李丹.高低质量浓度段塞组合聚合物驱提高采收率实验[J].大庆石油地质与开发,2018,37(6):121-124.
LI Dan.Experiment of the polymer flooding EOR in the combination of high and low mass concentration slugs[J].Petroleum Geology & Oilfield Development in Daqing,2018,37(6):121-124.
Options
Outlines

/

〈 〉