Multiple trips of the pipe string during sand flushing, water blocking, steam huff and puff, et al. of the heavy oil production wells lead to the problems of high cost of measures and low production rate. To this end, a ball-actuated multifunctional oil pump is developed in consideration of the actual needs of the site. On the basis of the conventional tubular oil pump, an open fixed valve assembly was developed, and the structure of the core components such as the slider sleeve, the support spring, and the fixed valve seat were optimized and designed to form three types of ball-actuated multifunctional oil pumps. Before the ball is actuated, the pump pipe is used to implement the corresponding measures for the oil well. After the measures are implemented, the fixed ball is actuated, the sucker rod and piston are run in, and the pump can be directly transferred to production, which makes the operation link of pulling up the pipe string and running the pump again omitted, and meets the on-site requirements of one-time pipe string completion for oil well steam injection, sand flushing, water blocking and other processes. This technology has been applied for 29 well times in total, with a success rate of 100%. The ball-actuated multifunctional oil pump can effectively simplify the operation and construction process, reduce the operation cost, improve the production rate of oil wells, and provide technical support for the efficient production of heavy oil wells.
[1] 韩力,王中武,李海涛,等.有杆泵分层举升采油技术研究[J].石油钻采工艺,2010,32(2):65-67.
HAN Li,WANG Zhongwu,LI Haitao,et al.Study on the sucker rod pump for the separate zone artificial lift production technology[J].Oil Drilling & Production Technology,2010,32(2):65-67.
[2] 任文博,宋正聪,汪沪亮.杆式泵泄压工具的研制与应用[J].特种油气藏,2017,24(5):161-164.
REN Wenbo,SONG Zhengcong,WANG Huliang.Development and application of tools to release pressures in sucker rod pump[J].Special Oil & Gas Reservoirs,2017,24(5):161-164.
[3] 庄栋,秦延才,赵德林,等.埕91块深层超稠油开发配套工艺技术[J].特种油气藏,2011,18(2):114-116.
ZHUANG Dong,QIN Yancai,ZHAO Delin,et al.Supporting techniques of developing deep super heavy oil in the Cheng 91 Block[J].Special Oil & Gas Reservoirs,2011,18(2):114-116.
[4] 李大建,甘庆明,牛彩云,等.长庆油田三层分采工艺技术探索与实践[J].钻采工艺,2014,37(6):65-66,70.
LI Dajian,GAN Qingming,NIU Caiyun,et al.Practice of three layer separate mining technology in Changqing Oilfield[J].Drilling & Production Technology,2014,37(6):65-66,70.
[5] 洪黎,胡英才,杨康敏,等.大流道抽稠泵的研制与应用[J].钻采工艺,2018,41(3):79-80,91.
HONG Li,HU Yingcai,YANG Kangmin,et al.Development of heavy oil pump with large flow area and its application[J].Drilling & Production Technology,2018,41(3):79-80,91.
[6] 张华,刘义刚,周法元,等.海上稠油多元热流体注采一体化关键技术研究[J].特种油气藏,2017,33(4):171-174.
ZHANG Hua,LIU Yigang,ZHOU Fayuan,et al.Research on injection-production integrated technology with multiple thermal fluid for offshore heavy oil field[J].Special Oil & Gas Reservoirs,2017,33(4):171-174.
[7] 董世民,王春华,李文婷,等.抽油泵泵阀运动规律的新模型及计算机仿真[J].石油机械,1999,27(11):1-4.
DONG Shimin,WANG Chunhua,LI Wenting,et al.A new movement model of oil well pump and computer simulation[J].China Petroleum Machinery,1999,27(11):1-4.
[8] 李庆海,李志广,阮刚,等.新型可控多功能底阀抽油泵研制与应用[J].石油矿场机械,2010,39(7):80～83.
LI Qinghai,LI Zhiguang,RUAN Gang,et al.Development and application of a sucker rod pump fitted with controllable multifunction bottom valve[J].Oil Field Equipment,2010,39(7):80-83.
[9] 黎伟,龙华,赵奎,等.抽油泵固定阀组阀球座密封锥角优选[J].石油机械,2012,40(6):98-100.
LI Wei,LONG Hua,ZHAO Kui,et al.Optimization of the seal cone angle for the fixed valve block ball seat of subsurface pump[J].China Petroleum Machinery,2012,40(6):98-100.
[10] 汪云鹤,抽油井不压井作业装置及抽油泵底阀设计[J].石油矿场机械,2020,49(5):60-64.
WANG Yunhe.Design of snubbing device and bottom valve of oil well pump for pumping well[J].Oil Field Equipment,2020,49(5):60-64.
[11] 刘连伟,孟宪威,孙学本,等.注蒸汽式稠油开采用特种杆式抽油泵[J].石油机械,2018,46(5):95-98.
LIU Lianwei,MENG Xianwei,SUN Xueben,et al.A special rod pump for steam injection heavy oil recovery[J].China Petroleum Machinery,2018,46(5):95-98.
