The channel sand reservoirs in the Tarim Basin are categorized as ultra-deep,high-temperature,and high-salt reservoirs,characterized by strong reservoir heterogeneity.Injected water tends to channel along the central part of the channel with better physical properties.To address this issue,physical simulation studies on swelling emulsion flooding were conducted using visualized micro-models and heterogeneous long-core models.The study analyzed the characteristics and mechanisms of flooding,optimized the flooding parameters and slug combination methods,and implemented in-situ applications.The results indicate that the remaining oil distribution types after water flooding in channel sand reservoirs mainly include multi-branch cluster,parallel throat,corner concave,dispersed isolated droplet,and contiguous blocky types.The flooding mechanism of the swelling emulsion involves deep migration+viscosity increase and pressure enhancement,swelling plugging+deformation migration and stripping oil film+push-pull dragging.The optimized flooding parameters are as follows:injection volume is 0.30 times the pore volume,mass fraction is 8%,emulsion particle size is in the micrometer range,injection rate is 0.52 mL/min,and the injection slug combination is 0.15 times the pore volume of small-particle-size lotion particles+0.15 times the pore volume of large-particle-size emulsion particles.In-situ applications demonstrate significant flooding effects,with the daily oil production of the flooding well group increasing to a maximum of 26.4 t and the water content decreasing to a minimum of 32.1%.The research achievement is of great significance for tapping the remaining oil potential in ultra-deep,high-temperature,high-salt channel sand reservoirs with strong heterogeneity.
Wang Lei
,
Ye Rongjun
,
Chen Derui
,
Xu Wenjun
,
Zhang Jianpeng
. Research and Application of Expansion Lotion Profile Control and Flooding Technology for Ultra-deep High-temperature High-salinity Reservoirs[J]. Special Oil & Gas Reservoirs, 2024
, 31(6)
: 130
-136
.
DOI: 10.3969/j.issn.1006-6535.2024.06.016
[1] 马新平.塔河油田YT2井区三叠系阿三段河道砂油藏描述[D].青岛:中国石油大学(华东),2015.
MA Xinping.Description of channel sand reservoir in A3 Member of Triassic in YT2 Well Area of Tahe Oilfield[D].Qingdao:China University of Petroleum (East China),2015.
[2] 梁宏刚,先伟,李文平.塔河油田超深层、薄储层、窄河道砂体识别与描述技术[J].地质科技情报,2015,34(5):180-183.
LIANG Honggang,XIAN Wei,LI Wenping.Identification and description technique for ultra-deep,thin reservoir,narrow channel sand,Tahe Oilfield[J].Geological Science and Technology Information,2015,34(5):180-183.
[3] 周海燕,张运来,何逸凡,等.新型交联聚合物微球调驱性能研究[J].西南石油大学学报(自然科学版),2022,44(6):175-182.
ZHOU Haiyan,ZHANG Yunlai,HE Yifan,et al.A study on profile control and flooding performance of new crosslinked polymer microspheres[J].Journal of Southwest Petroleum University (Science & Technology Edition),2022,44(6):175-182.
[4] 邹龙庆,何怀银,杨亚东,等.页岩气水平井暂堵球运移特性数值模拟研究[J].石油钻探技术,2023,51(5):156-166.
ZOU Longqing,HE Huaiyin,YANG Yadong,et al.Numerical simulation study on the migration characteristics of ball sealers in horizontal shale gas wells[J].Petroleum Drilling Techniques,2023,51(5):156-166.
[5] 葛罗.大庆油田萨北区块中渗透砂岩油藏凝胶调剖剂运移吸附实验研究[J].石油钻探技术,2023,51(3):119-125.
GE Luo.Experimental study on the migration and adsorption of gel profile control agent in medium-permeability sandstone in the Sabei Block of Daqing Oilfield[J].Petroleum Drilling Techniques,2023,51(3):119-125.
[6] 秦山.E31油藏二次开发阶段深部调驱技术研究[D].成都:西南石油大学,2017.
QIN Shan.Research on deep profile control and flooding technology in the secondary development stage of E31 Reservoir[D].Chengdu:SouthWest Petroleum University,2017.
[7] 李子豪.耐温耐盐自组装深部调驱体系流动机理研究[D].北京:中国石油大学(北京),2016.
LI Zihao.Study on flow mechanism of self-assembly deep profile control system with temperature and salt tolerance[D].Beijing:China University of Petroleum(Beijing),2016.
[8] 马珍福,邵现振,李刚,等.低渗油藏扩容压驱工艺技术在渤南油田的应用[J].非常规油气,2023,10(4):58-66.
MA Zhenfu,SHAO Xianzhen,LI Gang,et al.Application of dilatant pressure flooding technology in low permeability reservoir in Bonan Oilfield[J].Unconventional Oil & Gas,2023,10(4):58-66.
[9] 王金铸,龚雪峰,刘发根,等.高效自适应纳米乳液调驱技术在东北油田的应用[J].中国石油大学胜利学院学报,2021,35(4):50-57.
WANG Jinzhu,GONG Xuefeng,LIU Fagen,et al.Application of efficient adaptive nanoemulsion profile control technology in Northeast Oilfield[J].Journal of Shengli College China University of Petroleum,2021,35(4):50-57.
[10] 冯洋,杨国旗,李颖涛,等.基于砂岩岩心模型的微观水驱油渗流规律和剩余油赋存状态实验[J].非常规油气,2022,9(4):98-106.
FENG Yang,YANG Guoqi,LI Yingtao,et al.Experiment of microscopic water flooding seepage law and remaining oil occurrence state based on sandstone core model[J].Unconventional Oil & Gas,2022,9(4):98-106.
[11] 赵光,戴彩丽,由庆.冻胶分散体软体非均相复合驱油体系特征及驱替机理[J].石油勘探与开发,2018,45(3):464-473.
ZHAO Guang,DAI Caili,YOU Qing.Characteristics and displacement mechanisms of the dispersed particle gel soft heterogeneous compound flooding system[J].Petroleum Exploration and Development,2018,45(3):464-473.
[12] 王瑜.葡北油田纳微米微球深部调驱实验研究[D].大庆:东北石油大学,2013.
WANG Yu.Experimental study on deep profile control and flooding of nano-micron microspheres in Pubei Oilfield[D].Daqing:Northeast Petroleum University,2013.
[13] 张莉娜,任建华,胡春锋.常压页岩气立体开发特征及缝网干扰规律研究[J].石油钻探技术,2023,51(5):149-155.
ZHANG Lina,REN Jianhua,HU Chunfeng.Three-dimensional development characteristics and rracture network interference of atmospheric shale gas reservoir[J].Petroleum Drilling Techniques,2023,51(5):149-155.
[14] WEN Yiping,LAI Nanjun,DU Zhaofeng,et al.Application of orthogonal experiment method in foam flooding system composition and injection parameter optimization[J].Journal of Petroleum Science and Engineering,2021,204:108663.
[15] 吕杭,刘向斌,王庆国,等.黏度可控凝胶体系注入参数优化[J].新疆石油地质,2018,39(6):708-712.
LYU Hang,LIU Xiangbin,WANG Qingguo,et al.Injection parameter optimization of aviscosity-controlled gel system[J].Xinjiang Petroleum Geology,2018,39(6):708-712.
