Drilling & Production Engineering

Oil-based high filtration loss pressure-bearing plugging technology for shale formations

  • ZHANG Jing ,
  • HENG De ,
  • XU Xinghai ,
  • LI Bo ,
  • WEN Qianbin ,
  • HUANG Xudong ,
  • WEN Jie
Expand
  • 1. Sichuan Changning Natural Gas Development Co., Ltd, Chengdu, Sichuan 610000, China;
    2. Intercontinental Strait Energy Technology Co., Ltd, Chengdu, Sichuan 610000, China;
    3. Chengdu Hanyuan Junye Oilfield Technology Co., Ltd., Chengdu, Sichuan 610000, China

Received date: 2024-08-18

  Revised date: 2025-05-18

  Online published: 2025-09-03

Abstract

For the issue of frequent and severe oil-based drilling fluid losses in shale formations and the ineffectiveness of conventional plugging methods, an oil-based high filtration loss pressure-bearing plugging agent has been developed. Tests on its suspension stability, filtration time, initial strength, pressure-bearing capacity, and compatibility with drilling fluids were conducted. The properties and plugging mechanism of the agent were analyzed, along with its application process and field performance. The study shows that the oil-based high filtration loss plugging agent is a uniform mixture of fibers, porous inert materials, infiltrating materials, and filter-aids in specific proportions. The formulated slurry has good suspension stability, a total filtration time of less than 50 seconds, high initial strength of the solidified body, stable rapid filtration properties at 150 ℃, a pressure-bearing range of 10.0 to 19.0 MPa, and good compatibility with drilling fluids. Field application results show that this technology is simple and safe in operation, with strong adaptability of the oil-based drilling fluid and high pressure-bearing capacity. It is suitable for plugging small, medium, and large-scale losses in oil-based drilling fluids, as well as for addressing leakage in water-sensitive shale formations using water-based drilling fluids. This study offers a new solution for plugging the oil-based drilling fluid loss in shale formations.

Cite this article

ZHANG Jing , HENG De , XU Xinghai , LI Bo , WEN Qianbin , HUANG Xudong , WEN Jie . Oil-based high filtration loss pressure-bearing plugging technology for shale formations[J]. Special Oil & Gas Reservoirs, 2025 , 32(4) : 143 -148 . DOI: 10.3969/j.issn.1006-6535.2025.04.017

References

[1] 于欣,张振,郭梦扬,等.抗高温油基钻井液堵漏剂的研制与应用——以龙马溪组页岩气井W204H为例[J].断块油气田,2021,28(2):168-172.
YU Xin,ZHANG Zhen,GUO Mengyang,et al.Development and application of high temperature resistant oil-based drilling fluid plugging agent:taking shale gas well W204H of Longmaxi Formation as an example[J].Fault-Block Oil & Gas Field,2021,28(2):168-172.
[2] LAVROV A.Lost circulation:mechanisms and solutions[M].Cambridge:Gulf Professional Publishing,2016:1-2.
[3] REHM B,SCHUBERT J,HAGHSHENAS A,et al.Managed pressure drilling[M].Houston:Gulf Publishing Company,2009:5-8.
[4] COOK J,GROWCOCK F,GUO Q,et al.Stabilizing the wellbore to prevent lost circulation[J].Oilfield Review,2011,23(4):26-35.
[5] DUPRIEST F.Fracture closure stress(FCS)and lost returns practices[C].SPE92192,2005:1-11.
[6] 许明标,赵明琨,侯珊珊,等.油基桥架堵漏剂的研究与应用[J].断块油气田,2018,25(6):799-802.
XU Mingbiao,ZHAO Mingkun,HOU Shanshan,et al.Research and application of oil-based bridge plugging agent[J].Fault-Block Oil & Gas Field,2018,25(6):799-802.
[7] ONYIA E C.An analysis of experimental data on lost circulation problems while drilling with oil-base mud[C].SPE22581,1991:425-436.
[8] FENG Y,JONES J F,GRAY K E.A review on fracture-initiation and-propagation pressures for lost circulation and wellbore strengthening[J].SPE Drilling & Completion,2016,31:134-144.
[9] ASTON M S,ALBERTY M W,DUNCUM S,et al.A new treatment for wellbore strengthening in shale[C].SPE110713,2007:1-7.
[10] HE Wenwu,JIMBI E,CHAMBERLIN M,et al.Invasion and movement of fluids in shale formations and wellbore stability[C].SPE178766,2016:1-12.
[11] YAN Xiaopeng,KANG Yili,YOU Lijun,et al.Drill-in fluid loss mechanisms in brittle gas shale:a case study in the Longmaxi Formation,Sichuan Basin,China[J].Journal of Petroleum Science and Engineering,2019,174:394-405.
[12] XU Chengyuan,YAN Xiaopeng,KANG Yili,et al.Friction coefficient:a significant parameter for lost circulation control and material selection in naturally fractured reservoir[J].Energy,2019,174:1012-1025.
[13] YAN Xiaopeng,KANG Yili,XU Chengyuan,et al.Impact of friction coefficient on the mesoscale structure evolution under shearing of granular plugging zone[J].Powder Technology,2021,394:133-148.
[14] FENG Yongcun,GRAY K E.Lost circulation and wellbore strengthening[M].Cham:Springer,2018:33-40.
[15] XU Chengyuan,KANG Yili,YOU Lijun,et al.Lost-circulation control for formation-damage prevention in naturally fractured reservoir:mathematical model and experimental study[J].SPE Journal,2017,22:1654-1670.
[16] 周永胜,吴伟,冯建伟,等.致密碳酸盐岩气藏裂缝预测及主控因素分析——以四川盆地G气田震旦系灯影组为例[J].东北石油大学学报,2024,48(2):102-115.
ZHOU Yongsheng,WU Wei,FENG Jianwei,et al.Fracture prediction and main controlling factors analysis of tight carbonate gas reservoir: take the Sinian Dengying Formation of G Gas Field in Sichuan Basin as an example[J]. Journal of Northeast Petroleum University,2024,48(2):102-115.
[17] 孙强,张翼飞,于春磊,等.低渗透砂岩储层压驱裂缝起裂及扩展特征实验研究[J].油气地质与采收率,2024,31(6):160-167.
SUN Qiang,ZHANG Yifei,YU Chunlei,et al.Experimental study on fracture initiation and propagation characteristics caused by pressure drive in low-permeability sandstone reservoirs[J].Petroleum Geology and Recovery Efficiency,2024,31(6):160-167.
Outlines

/