Special Oil & Gas Reservoirs >

2025 , Vol. 32 >Issue 6: 141 - 149

DOI: https://doi.org/10.3969/j.issn.1006-6535.2025.06.017

Drilling & Production Engineering

Plugging mechanism and technical countermeasures for weak gel flooding in unconsolidated sandstone reservoirs

  • GAO Jianchong ,
  • LIU Yigang ,
  • LU Xiangguo ,
  • LIU Jinxiang ,
  • HE Xin ,
  • MENG Xinzhi ,
  • WANG Yuqing ,
  • HUANG Wenjing
Expand
  • 1. Key Laboratory for Improving Oil and Gas Recovery Northeast Petroleum University,Ministry of Education, Daqing, Heilongjiang 163318, China;
    2. CNOOC China Tianjin Company, Tianjin 300451, China

Received date: 2025-06-17

  Revised date: 2025-07-31

  Online published: 2025-12-31

Fold

Abstract

Aiming at the problem of successive plugging in oil wells during the late stage of weak gel flooding in the unconsolidated sandstone reservoir of Bohai L Oilfield, research on the plugging mechanism and plug removal technical countermeasures for weak gel flooding oil wells in this reservoir was carried out. The results indicate that the plugging material in oil wells consists of water, heavy components of crude oil, polymer and inorganic matter with contents of 63.99%, 14.82%, 14.48% and 6.71% respectively. Among the inorganic matter, the contents of CaCO3, MgCO3 and SiO2 are 60.00%, 20.50% and 13.00% respectively.Among the heavy components of crude oil, the contents of alkanes, aromatic hydrocarbons, resins and asphaltenes are 13.78%, 9.97%, 32.84%, and 43.40% respectively. The limited space on offshore platforms causes a large amount of insufficiently matured polymer gel particles to accumulate on the screen during weak gel injection. These particles subsequently mature slowly to form flexible gel bodies, which entrain mud and sand during migration to form multi-component encapsulated plugging material. During production, they cause plugging again due to the constraints of the screen and pump inlets. To remove on-site plugging, the best depolymerizer combination "0.05% potassium persulfate + 0.05% ferrous sulfate + 0.10% citric acid", organic solvent combination "30.00% diesel oil + 20.00% dimethyl sulfoxide + 2.00% sodium dodecyl sulfate + 0.50% penetrant" and scale dissolver combination "10% hydrochloric acid + 4% hydrofluoric acid + 1% corrosion inhibitor Lan826" were preferentially selected. On site, by alternately injecting slugs of depolymerizer, organic solvent, and scale dissolver, the composite plugging material near the oil well was effectively removed, with significant liquid and oil increase performance. The daily liquid production increased by 166.4%, and the daily oil production increased by 185.3%. This research can provide reference for oil well plug removal in offshore oilfields.

Key words： unconsolidated sandstone; weak gel flooding; plugging material; formation mechanism; technical countermeasures

Cite this article

GAO Jianchong , LIU Yigang , LU Xiangguo , LIU Jinxiang , HE Xin , MENG Xinzhi , WANG Yuqing , HUANG Wenjing . Plugging mechanism and technical countermeasures for weak gel flooding in unconsolidated sandstone reservoirs[J]. Special Oil & Gas Reservoirs, 2025 , 32(6) : 141 -149 . DOI: 10.3969/j.issn.1006-6535.2025.06.017

References

[1] XIE Kun,LU Xiangguo,LI Qiang,et al.Analysis of reservoir applicability of hydrophobically associating polymer[J].SPE Journal,2016,21(1):1-9.
[2] 吴晓燕,朱洪庆,张宁,等.锦州9-3油田二元复合驱产出表面活性剂的检测方法研究[J].油田化学,2014,31(3):457-460.
WU Xiaoyan,ZHU Hongqing,ZHANG Ning,et al.Detection method study on produced surfactant of binary system flooding in Jinzhou 9-3 Oilfield[J].Oilfield Chemistry,2014,31(3):457-460.
[3] 徐国瑞,鞠野,李翔,等.“堵水+调剖”联合作业效果及液流转向机理研究——以渤海SZ36-1油藏地质和流体条件为例[J].海洋石油,2017,37(1):30-36.
XU Guorui,JU Ye,LI Xiang,et al.Study on the effect of "water shut-off and profile control" combined operation and liquid diverting mechanism:a case study of SZ36-1 Reservoirs in Bohai Oilfield[J].Offshore Oil,2017,37(1):30-36.
[4] 邹剑,陈华兴,高尚,等.SZ36-1油田注聚井和聚驱受益油井堵塞物的组成及成因对比分析[J].石油与天然气化工,2019,48(5):77-82.
ZOU Jian,CHEN Huaxing,GAO Shang,et al.Comparisons of component and formation mechanism of blockages in polymer flooding injection well and response well in SZ36-1 Oilfield[J].Chemical Engineering of Oil & Gas,2019,48(5):77-82.
[5] 刘东,李丽,周承诗,等.注聚区油井防砂层堵塞原因与解堵措施[J].中国石油大学学报(自然科学版),2010,34(2):78-82.
LIU Dong,LI Li,ZHOU Chengshi,et al.Plugging mechanism and plug removing of sand control area in polymer injection well[J].Journal of China University of Petroleum(Edition of Natural Sciences),2010,34(2):78-82.
[6] 关德,杨寨,张勇,等.渤海两油田油井堵塞原因分析及化学解堵试验[J].西南石油学院学报,2002,24(2):35-37.
GUAN De,YANG Zhai,ZHANG Yong,et al.Diagnosis of reasons for oil well plugging and chemical remedial treatment tests at two oilfields in Bohai Bay[J].Journal of Southwest Petroleum Institute,2002,24(2):35-37.
[7] 蔡莹莹,陈小凯,曾双红,等.聚驱/调驱井解堵增注技术研究与应用[J].化学工程师,2017,31(5):60-63.
CAI Yingying,CHEN Xiaokai,ZENG Shuanghong,et al.Research and application of polymer broken down and water injectivity technology[J].Chemical Engineer,2017,31(5):60-63.
[8] 赵林,高申领,陈渊,等.砂岩油藏聚合物堵塞机理及解堵方法研究[J].特种油气藏,2022,29(3):156-161.
ZHAO Lin,GAO Shenling,CHEN Yuan,et al.Study on polymer plugging mechanism and plug removal method in sandstone reservoirs[J].Special Oil & Gas Reservoirs,2022,29(3):156-161.
[9] 陈超.渤海油田聚驱油井复合解堵体系及作用机理研究[D].青岛:中国石油大学(华东),2020.
CHEN Chao.Research on composite plug removal system and mechanism for polymer flooding wells in Bohai Oilfield[D].Qingdao:China University of Petroleum(East China),2020.
[10] 卢祥国,高振环,闫文华.人造岩心渗透率影响因素试验研究[J].大庆石油地质与开发,1994,13(4):53-55.
LU Xiangguo,GAO Zhenhuan,YAN Wenhua.Experimental study of factors influencing permeability of artificial core[J].Petroleum Geology & Oilfield Development in Daqing,1994,13(4):53-55.
[11] 卢祥国,宋合龙,王景盛.石英砂环氧树脂胶结非均质模型制作方法:200510063665.8[P].2005-09-07.
LU Xiangguo,SONG Helong,WANG Jingsheng.Manufacturing method for heterogeneous models with quartz sand epoxy resin cementation:200510063665.8[P].2005-09-07.
[12] 唐晓旭,高建崇,王秋霞,等.耐温抗盐高效聚合物微球性能评价与应用效果[J].油田化学,2022,39(3):425-430.
TANG Xiaoxu,GAO Jianchong,WANG Qiuxia,et al.Performance evaluation and application effect of high efficiency polymer microsphere with temperature and salt resistance[J].Oilfield Chemistry,2022,39(3):425-430.
[13] 符军放,刘克清,莫成孝,等.PESA与EDTMP复配剂用于油田硫酸钡锶垢阻垢研究[J].石油化工应用,2015,34(2):94-97.
FU Junfang,LIU Keqing,MO Chengxiao,et al.Study of combining PESA and EDTMP for inhibiting barium sulfate and strontium sulfate in oilfield[J].Petrochemical Industry Application,2015,34(2):94-97.
[14] 于洪江,肖志海.DTPA对BaSO4垢清除作用影响因素研究[J].油田化学,2015,32(3):427-430.
YU Hongjiang,XIAO Zhihai.Study on influence factors of clearance function of DTPA on BaSO4 scale[J].Oilfield Chemistry,2015,32(3):427-430.
[15] 潘恒民,孙庆宏,王鑫,等.大庆外围油田油水井清防垢技术[J].油田化学,2005,22(2):119-121.
PAN Hengmin,SUN Qinghong,WANG Xin,et al.Reservoir precipitates removal and prevention in water injection and oil production wells at peripheral oil fields of Daqing[J].Oilfield Chemistry,2005,22(2):119-121.
[16] 孙金声,杨景斌,白英睿,等.超分子凝胶形成机理及其在油气钻采工程领域应用现状和前景[J].石油学报,2020,43(9):1334-1350.
SUN Jinsheng,YANG Jingbin,BAI Yingrui,et al.Formation mechanism of supramolecular gel and its application status and prospect in the field of oil and gas drilling and production engineering[J].Acta Petrolei Sinica,2020,43(9):1334-1350.
[17] 张宝岩,卢祥国,谢坤,等.Cr3+聚合物凝胶与水交替注入调驱效果和机理分析——以渤海油田储层条件为例[J].石油化工高等学校学报,2016,29(1):35-40.
ZHANG Baoyan,LU Xiangguo,XIE Kun,et al.Profile control and flooding effect of alternate injection of Cr3+ polymer gel and water and its mechanism analysis:taking the Bohai Oilfield as an example[J].Journal of Petrochemical Universities,2016,29(1):35-40.
[18] 刘义刚,张云宝,谢坤,等.Cr3+聚合物凝胶与水交替注入调驱作用机理——以渤海LD10-1油田为例[J].断块油气田,2017,24(2):251-254.
LIU Yigang,ZHANG Yunbao,XIE Kun,et al.Profile control and flooding effect of alternative injection of Cr3+ polymer gel and water and its mechanism:taking Bohai LD10-1Oilfield as an example[J].Fault-Block Oil & Gas Field,2017,24(2):251-254.
[19] 卢祥国,王伟.Al3+交联聚合物分子构型及其影响因素[J].物理化学学报,2006,2(5):631-634.
LU Xiangguo,WANG Wei.The molecular configuration and its influential factors of Al3+ cross-linked polyacrylamide gel[J].Acta Physico-Chimica Sinica,2006,2(5):631-634.
[20] 卢祥国,王晓燕,李强,等.高温高矿化度条件下驱油剂中聚合物分子结构形态及其在中低渗油层中的渗流特性[J].化学学报,2010,68(12):1229-1234.
LU Xiangguo,WANG Xiaoyan,LI Qiang,et al.The polymer molecular configuration in the oil displacement agent with high temperature and salinity and its seepage property in the medium-low permeability layer[J].Acta Chimica Sinica,2010,68(12):1229-1234.
[21] 舒政,陶刚,赵文森,等.海上平台提高母液配制浓度减小配注系统总体积的可行性分析[J].中国海上油气,2018,30(5): 123-130.
SHU Zheng,TAO Gang,ZHAO Wensen,et al.Feasibility analysis on reducing the total volume of injection allocation system by increasing the concentration of mother liquor on offshore platform[J].China Offshore Oil and Gas,2018,30(5): 123-130.
[22] 左清泉,孟祥海,陈士佳,等.海上油田速溶聚合物调驱体系室内实验研究[J].石油化工应用,2017,36(6):133-136,152.
ZUO Qingquan,MENG Xianghai,CHEN Shijia,et al.The indoor experimental study of instant polymer displacement system in offshore oilfield[J].Petrochemical Industry Application,2017,36(6):133-136,152.
[23] 陈文娟,赵文森,张健.海上油田聚合物溶液高效配制方法研究[J].油气田地面工程,2017,36(5):20-23.
CHEN Wenjuan,ZHAO Wensen,ZHANG Jian.Research on the efficient preparation method of the polymer solution in offshore oilfields[J].Oil-Gas Field Surface Engineering,2017,36(5):20-23.
Options
Outlines

/

〈 〉