Drilling & Production Engineering

Optimization method and practice of annular nitrogen thermal-insulation technology for steam-injection wells

  • Guo Binjian
Expand
  • PetroChina Liaohe Oilfield Company,Panjin,Liaoning 124010,China

Received date: 2026-01-19

  Revised date: 2026-06-07

  Online published: 2026-10-15

Abstract

During heavy-oil thermal recovery,improper application of annular thermal-insulation measures in steam-injection wells can readily induce technical problems in thermal injection,such as large steam-injection heat loss,wellhead uplift,casing damage,and wellbore corrosion.Therefore,based on the completion structure of thermal-injection wells and by comprehensively applying the basic principles of heat transfer and fluid mechanics,a model for the critical annular nitrogen injection rate was constructed.The factors influencing the critical annular nitrogen injection rate were analyzed,and an optimization method for annular nitrogen-injection thermal-insulation technology in thermal-injection wells was proposed.The results show that under different well-type conditions,horizontal wells have greater annular thermal resistance than directional wells and require higher critical nitrogen injection rates.The required critical nitrogen injection rate increases with increasing pressure,steam injection rate,and steam quality.With increases in the length and thermal conductivity of insulated tubing,the required critical nitrogen injection rate decreases rapidly.In addition,increasing interval pack-off in the annulus causes the required critical nitrogen injection rate to decrease linearly.Through integrated optimization design measures,such as simplifying the model for critical annular nitrogen injection rate,designing pack-off devices,optimizing the completion string,and reducing injection pressure,the nitrogen injection rate of the annular nitrogen-injection thermal-insulation technology was reduced by more than 75%.This study provides key theoretical guidance for improving steam heat-utilization efficiency and reducing the casing-damage rate in thermal-injection wells.

Cite this article

Guo Binjian . Optimization method and practice of annular nitrogen thermal-insulation technology for steam-injection wells[J]. Special Oil & Gas Reservoirs, 2026 , 33(4) : 139 -145 . DOI: 10.3969/j.issn.1006-6535.2026.04.018

References

[1] Han Xiaodong,Zhong Liguo,Liu Yigang,et al.Study and optimization of the first horizontal well steam flooding pilot for offshore oilfield[C].Offshore Technology Conference,2020.
[2] Vargo R,Payne M,Paul R,et al.Practical and successful prevention of annular pressure buildup on the marlin project[J].SPE Drilling & Completion,2003,18(3):228-234.
[3] 张磊,杨阳,于继飞,等.海上热采井氮气隔热注氮参数的优化[J].黑龙江科技大学学报,2023,33(4):536-541.
Zhang Lei,Yang Yang,Yu Jifei,et al.Optimisation of nitrogen injection parameters for nitrogen insulation in offshore thermal recovery wells[J].Journal of Heilongjiang University of Science and Technology,2023,33(4):536-541.
[4] 孙逢瑞.稠油油藏过热蒸汽吞吐井筒-地层传热传质模型研究[D].北京:中国石油大学(北京),2020:19-40.
Sun Fengrui.Wellbore-formation heat and mass transfer model for superheated steam huff-and-puff in heavy-oil reservoirs[D].Beijing:China University of Petroleum(Beijing),2020:19-40.
[5] 郑双进,谢仁军,黄志强,等.深水高温高压油气生产致井口抬升预测研究[J].中国海上油气,2021,33(3):126-134.
Zheng Shuangjin,Xie Renjun,Huang Zhiqiang,et al.Prediction for wellhead uplift caused by deepwater HTHP oil and gas production[J].China Offshore Oil and Gas,2021,33(3):126-134.
[6] 张坤,陈学忠,莫林,等.磨溪区块龙王庙组气藏生产阶段井完整性管理实践[J].钻采工艺,2020,43(3):111-113,126.
Zhang Kun,Chen Xuezhong,Mo Lin,et al.Practice of well integrity management during production of the Longwangmiao Formation gas reservoir in the Moxi Block[J].Drilling & Production Technology,2020,43(3):111-113,126.
[7] 陈朝伟,项德贵.四川盆地页岩气开发套管变形一体化防控技术[J].中国石油勘探,2022,27(1):135-141.
Chen Chaowei,Xiang Degui.Integrated prevention and control technology of casing deformation in shale gas development well in Sichuan Basin[J].China Petroleum Exploration,2022,27(1):135-141.
[8] 李美春,丁扬,孙金声,等.井筒降温技术研究现状及未来展望[J].石油学报,2025,46(4):789-800.
Li Meichun,Ding Yang,Sun Jinsheng,et al.Research progress and prospect of wellbore cooling technology[J].Acta Petrolei Sinica,2025,46(4):789-800.
[9] Teodoriu C,Falcone G.Labyrinth packer lowers the costs for steam injections wells:theoretical and experimental results[C].SPE110454-MS,2008:1-13.
[10] 潘建华.氮气隔热井筒传热物理模拟研究[J].特种油气藏,2004,11(1):96-99,109.
Pan Jianhua.Physical modeling of heat transmission in wellbore insulated by nitrogen[J].Special Oil & Gas Reservoirs,2004,11(1):96-99,109.
[11] 马春红.注汽井油套管环空氮气隔热井筒传热物理模型设计[J].石油仪器,2004,18(3):1-4,65.
Ma Chunhong.Design of physical model of wellbore heat transmission in steam injection well of nitrogen insulated casing annulus[J].Petroleum Instruments,2004,18(3):1-4,65.
[12] Valbuena E,Bashbush J L,Rincon A C.Energy balance in steam injection projects integrating surface-reservoir systems[C].SPE Latin American and Caribbean Petroleum Engineering Conference,2009.
[13] 李金蔓,霍宏博,陈毅,等.渤海稠油蒸汽吞吐环空注氮隔热工艺优化[J].石油化工应用,2019,38(10):37-40.
Li Jinman,Huo Hongbo,Chen Yi,et al.Nitrogen reverse circulation to improve heavy oil thermal recovery efficiency technology in Bohai Sea[J].Petrochemical Industry Application,2019,38(10):37-40.
[14] 刘利,马振,黄武鸣,等.海上大斜度热采井氮气隔热注氮排量优化研究[J].中国海上油气,2015,27(6):80-86.
Liu Li,Ma Zhen,Huang Wuming,et al.Optimization of nitrogen injection rate for thermal insulation by nitrogen in highly deviated wells for thermal recovery in offshore fields[J].China Offshore Oil and Gas,2015,27(6):80-86.
[15] 张学萍,李兆敏,张超,等.蒸汽吞吐井井筒注氮气隔热效果研究[C]//IFEDC油气田勘探与开发国际会议,2018.
Zhang Xueping,Li Zhaomin,Zhang Chao,et al.Study on heat insulation effect of nitrogen injection in wellbore of steam huff and puff well[C].IFEDC International Field Exploration and Development Conference,2018.
[16] 李兆敏,杨建平,林日亿.氮气辅助注蒸汽热采井筒中的流动与换热规律[J].中国石油大学学报(自然科学版),2008,32(3):84-88.
Li Zhaomin,Yang Jianping,Lin Riyi.Flow and heat exchange laws in thermal recovery well bore by steam injection assisting with nitrogen gas[J].Journal of China University of Petroleum(Edition of Natural Science),2008,32(3):84-88.
[17] Ramey H J.Wellbore heat transmission[J].Journal of Petroleum Technology,1962,14(4):427-435.
[18] Satter Abdus.Heat losses during flow of steam down a wellbore[J].Journal of Petroleum Technology,1965,17(7):845-851.
[19] Beggs D H,Brill J P.A study of two-phase flow in inclined pipes[J].JPT,1973,25(5):607-617.
[20] 西安热工研究所.水和水蒸汽热力学性质图表(第四版)[M].北京:高等教育出版社,2021:51-64.
Xi'an Thermal Power Research Institute.Tables and diagrams of thermodynamic properties of water and steam(4th ed)[M].Beijing:Higher Education Press,2021:51-64.
[21] 杨世铭,陶文铨.传热学(第4版)[M].北京:高等教育出版社,2006:212-217.
Yang Shiming,Tao Wenquan.Heat transfer(4th ed)[M].Beijing:Higher Education Press,2006:212-217.
[22] Aziz Khalid.Calculation of bottom-hole pressure in gas wells[J].Journal of Petroleum Technology,1967,19(7):897-899.
Outlines

/

〈 〉