脉冲电沉积制备NiW-Si3N4/MWCNTs复合镀层及其性能研究

张伟; 李本刚; 龙雄云; 景文杰; 朱名召; 李虹杰; 张维罡; 何腾

doi:10.3969/j.issn.1006-6535.2021.04.022

特种油气藏 >

2021 , Vol. 28 >Issue 4: 158 - 163

DOI: https://doi.org/10.3969/j.issn.1006-6535.2021.04.022

钻采工程

脉冲电沉积制备NiW-Si₃N₄/MWCNTs复合镀层及其性能研究

张伟 ,
李本刚 ,
龙雄云 ,
景文杰 ,
朱名召 ,
李虹杰 ,
张维罡 ,
何腾

展开

1.中国石油长庆油田分公司,宁夏银川 750003;
2.中国石油长庆油田分公司,宁夏吴忠 751506;
3.西南石油大学,四川成都 610500;
4.东北石油大学,黑龙江大庆 163318

张伟(1985—),男,工程师,2009年毕业于长江大学石油工程专业,现从事油气田集输工艺、腐蚀与材料方面的研究工作。

收稿日期: 2020-09-19

修回日期: 2021-06-01

网络出版日期: 2022-02-18

基金资助

西南石油大学油气藏地质及开发工程国家重点实验室开放课题基金“G201810-酸性气田安全开发及高效利用材料”(G201810);西南石油大学研究生科研创新基金“三维导电基底负载过渡金属基复合材料的制备及电催化析氢性能研究”(2019cxzd030)

收起

Study on Preparation of NiW-Si₃N₄/MWCNTs Composite Coating by Pulse Electrodeposition and Its Performance

Zhang Wei ,
Li Bengang ,
Long Xiongyun ,
Jing Wenjie ,
Zhu Mingzhao ,
Li Hongjie ,
Zhang Weigang ,
He Teng

Expand

1. PetroChina Changqing Oilfield Company, Yinchuan, Ningxia 750003, China;
2. PetroChina Changqing Oilfield Company, Wuzhong, Ningxia 751506, China;
3. Southwest Petroleum University, Chengdu, Sichuan 610500, China;
4. Northeast Petroleum University, Daqing, Heilongjiang 163318, China

Received date: 2020-09-19

Revised date: 2021-06-01

Online published: 2022-02-18

Fold

摘要

长期暴露在复杂工况下的油管、套管钢材表面极易发生腐蚀,导致材料使用寿命降低,影响油井正常生产。通过脉冲电沉积技术在C45钢基材表面制备了NiW-Si₃N₄/MCNTs复合镀层,并探究了纳米颗粒Si₃N₄与MWCNTs用量对复合镀层表面微观形貌、硬度和耐蚀性等性能的影响。研究表明:纳米颗粒的加入在抑制Ni-W镀层的(220)与(200)晶面生长的同时,还能促进Ni-W镀层晶粒的细化,大幅度提升NiW-Si₃N₄/MCNTs复合镀层的显微硬度,最高可达1 243.7 HV;与Ni-W镀层相比,NiW-Si₃N₄/MCNTs复合镀层的阻抗更大,腐蚀速率更低,抗腐蚀性能更好。该项研究为进一步提高Ni-W镀层物理化学性能奠定了理论基础,缓解了油管的腐蚀问题。

关键词： 脉冲电沉积; NiW-Si₃N₄/MWCNTs复合镀层; 显微硬度; 耐蚀性能

本文引用格式

张伟 , 李本刚 , 龙雄云 , 景文杰 , 朱名召 , 李虹杰 , 张维罡 , 何腾 . 脉冲电沉积制备NiW-Si₃N₄/MWCNTs复合镀层及其性能研究[J]. 特种油气藏, 2021 , 28(4) : 158 -163 . DOI: 10.3969/j.issn.1006-6535.2021.04.022

Abstract

It is prone to corrosion for the steel surface of tubing and casing exposed to complex working conditions for a long time, leading to a reduction in the service life of the material and impact on the production of oil wells. NiW-Si₃N₄/MCNTs composite coating was prepared on the surface of C45 steel substrate by pulse electrodeposition technology, and the influence of the amount of nano-particles Si₃N₄ and MWCNTs used on the surface micromorphology, hardness and corrosion resistance of the composite coating was explored. It was found in the study that nano-particles added could inhibit the growth of the (220) and (200) crystal planes of the Ni-W coating, and promoted the crystal particle refinement of the Ni-W coating, greatly enhancing the microhardness (up to 1 243.7 HV) of NiW-Si₃N₄/MCNTs composite coating; compared with Ni-W coating, NiW-Si₃N₄/MCNTs composite coating was higher in resistance, lower in corrosion rate and better in corrosion resistance. The study laid a theoretical foundation for further enhancement of physico-chemical properties of Ni-W plating and reduction of tubing corrosion.

Key words： pulse electrodeposition; NiW-Si₃N₄/MWCNTs composite coating; microhardness; corrosion resistance

参考文献

[1] 孙福洋,赵国仙,郭清超,等.镍钨合金镀层对QT-900油管耐CO₂腐蚀的影响[J].表面技术,2014,43(6):6-10.
SUN Fuyang,ZHAO Guoxian,GUO Qingchao,et al.Effect of Ni-W alloy coating on the corrosion resistance of QT-900 coiled tubing[J].Surface Technology,2014,43(6):6-10.
[2] 宋中华,张士诚,周理志,等.钨镍合金镀层油管适用性[J].腐蚀与防护,2014,35(12):1256-1259.
SONG Zhonghua,ZHANG Shicheng,ZHOU Lizhi,et al.Applicability of tungsten nickel alloy coated tubing[J].Corrosion & Protection,2014,35 (12):1256-1259.
[3] 王绍军,刘含阳,胡勇,等.镀钨合金防腐油井管实验研究及应用[J].石油矿场机械,2012,41(11):46-49.
WANG Shaojun,LIU Hanyang,HU Yong,et al. Experimental research and application of anticorrosive oil well pipes with tungsten alloy coating[J].Oil Field Equipment,2012,41 (11):46-49.
[4] 裘智超,熊春明,叶正荣,等.镍钨合金镀层在高含CO₂及低含H₂S环境下腐蚀行为[J].石油矿场机械,2017,46(4):47-51.
QIU Zhichao,XIONG Chunming,YE Zhengrong,et al.Corrosion behavior of nickel and tungsten alloy plating in high CO₂ and Low H₂S corrosive environment[J].Oil Field Equipment,2017,46(4):47-51.
[5] BOONYONGMANEERAT Y,SAENGKIETTIYUT K,SAENAPITAK S,et al.Pulse co-electrode position and characterization of NiW-WC composite coatings[J].Journal of Alloys and Compounds,2010,506(1):151-154.
[6] SANGEETHA S,KALAIGNAN G P,ANTHUVAN J T.Pulse electrode position of self-lubricating Ni-W/PTFE nanocomposite coatings on mild steel surface[J].Applied Surface Science,2015,359:412-419.
[7] CAMARGO M K,TUDELA I,SCHMIDT U,et al.Ultrasound assisted electrode position of Zn and Zn-TiO₂ coatings[J].Electrochimica Acta,2016,198:287-295.
[8] LI H,HE Y,HE T,et al.Ni-W/BN(h)electrodeposited nanocomposite coating with functionally graded microstructure[J].Journal of Alloys and Compounds,2017,704:32-43.
[9] GYAWALI G,TRIPATHI K,JOSHI B,et al.Mechanical and Tribological properties of Ni-W-TiB₂ composite coatings[J].Journal of Alloys And Compounds,2017,721:757-763.
[10] LI B S,ZHANG W W,ZHANG W,et al.Preparation of Ni-W/SiC nanocomposite coatings by electrochemical deposition[J].Journal of Alloys and Compounds,2017,702:38-50.
[11] HE T,HE Y,LI H,et al.Fabrication of Ni-W-B4C composite coatings and evaluation of its microhardness and corrosion resistance properties[J].Ceramics International,2018,44(8):9188-9193.
[12] 田水昌,崔洪芝,张国松,等.Ni-W-GO-Al₂O₃复合镀层的制备及其耐磨耐蚀性能[J].材料热处理学报,2019,40(2):140-147.
TIAN Shuichang,CUI Hongzhi,ZHANG Guosong,et al.Preparation of Ni-W-GO-Al₂O₃ composite coatings and its wear and corrosion resistance[J].Transactions of Materials and Heat Treatment,2019,40(2):140-147.
[13] CARDINAL M F,CASTRO P A, BAXI J,et al.Characterization and frictional behavior of nanostructured Ni-W-MoS₂ composite coatings[J].Surface and Coatings Technology, 2009,204(1/2):85-90.
[14] YANG Q B,JING Y J.Effect of surfactants on the anticorrosive and mechanical performance of Ni-W-MWCNTs nanocomposites coating[J].Protection of Metals and Physical Chemistry of Surfaces,2021,57(2):344-351.
[15] 孙万昌,冯佩,侯冠群,等.稀土钇对 Ni-W-Zr0₂ 复合镀层性能的影响[J].摩擦学学报,2013,33(6):600-605.
SUN Wanchang,FENG Pei,HOU Guanqun,et al.Effect of Y(NO₃)₃ addition on the property of Ni-W-ZrO₂ coating[J].Tribology,2013,33(6):600-605.
[16] ZHANG X H,LI X X,LIU W J,et al.Preparation and tribological behavior of electrodeposited Ni-W-GO composite coatings[J].Rare Metals,2019,38(7):695-703.
[17] LI B S,ZHANG W W,LI D D,et al.Preparation of NiW/TiN-Y₂O₃ composite ceramic coating for metallic parts protection by direct current deposition[J].Ceramics International,2019,45(10):13242-13250.
[18] 李辉,邵凤翔,刘希东.齿轮钢表面电沉积 Ni-W/SiC 复合镀层的研究[J].电镀与环保, 2019,39(5):17-19.
LI Hui,SHAO Fengxiang,LIU Xidong.Study on electrodeposition of Ni-W/SiC composite coating on the surface of gear steel[J].Electroplating & Pollution Control,2019,39(5):17-19.
[19] 舒霞,李云,吴玉程,等.Ni-W-ZrO₂复合镀层的制备及耐腐蚀性能[J].复合材料学报,2007,24(6):116-120.
SHU Xia,LI Yun,WU Yucheng,et al.Preparation and corrosion resistance of Ni-W-ZrO₂ composite coatings by electrodeposition[J].Acta Materiae Compositae Sinica,2007,24(6):116-120.
[20] HEMMAT E M,AFRAND M,ROSTAMIAN S,et al.Examination of rheological behavior of MWCNTs/ZnO-SAE40 hybrid nano-lubricants under various temperatures and solid volume fractions[J].Experimental Thermal and Fluid Science,2017,80:384-390.

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献