平衡式双解封注水封隔器的研制与应用

肖国华; 刘宇飞; 张鑫; 王远征; 张建忠; 路明; 王瑶

doi:10.3969/j.issn.1006-6535.2024.05.018

特种油气藏 >

2024 , Vol. 31 >Issue 5: 155 - 161

DOI: https://doi.org/10.3969/j.issn.1006-6535.2024.05.018

钻采工程

平衡式双解封注水封隔器的研制与应用

肖国华 ,
刘宇飞 ,
张鑫 ,
王远征 ,
张建忠 ,
路明 ,
王瑶

展开

1.中国石油冀东油田分公司,河北唐山 063004;
2.中国石油玉门油田分公司,甘肃酒泉 735200

肖国华(1966—),男,高级工程师,1989年毕业于江汉石油学院采油工程专业,现主要从事机械采油采气及井下工具研发工作。

收稿日期: 2023-02-19

修回日期: 2024-07-09

网络出版日期: 2024-12-24

基金资助

中国石油冀东油田分公司科技项目“新型分注工具研制与应用”(SY2020-02)

收起

Development and Application of Equilibrium Dual Unseating Water Injection Packer

Xiao Guohua ,
Liu Yufei ,
Zhang Xin ,
Wang Yuanzheng ,
Zhang Jianzhong ,
Lu Ming ,
Wang Yao

Expand

1. Petrochina Jidong Oilfield Company,Tangshan,Hebei 063004,China;
2. Petrochina Yumen Oilfield Company,Jiuquan,Gansu 735200,China

Received date: 2023-02-19

Revised date: 2024-07-09

Online published: 2024-12-24

Fold

摘要

针对冀东油田大斜度深井多级分注管柱解封负荷大、密封有效期短的问题,在剖析封隔器结构的基础上,对关键结构进行三维仿真模拟优化设计,研制了平衡式双解封注水封隔器。该封隔器设计独立的双解封方式,减小解封负荷;利用弹簧及注水管柱内外压差,实现反洗阀自动关闭;综合采用橡胶挤压及金属线密封方式,提高反洗阀密封可靠性;胶筒优选高强度氟橡胶材质,提高耐温耐压性能;设计平衡活塞保护解封销钉,消除高压差提前解封风险。现场应用11井次,施工成功率为100%,密封有效期超过30个月;起管解封负荷降低17.2%。该封隔器密封周期长,解封负荷小,可满足大斜度深井高压分注长效密封需求,具有良好的经济效益和推广应用前景。

关键词： 大斜度深井; 注水封隔器; 解封负荷; 密封有效期; 精细注水

本文引用格式

肖国华 , 刘宇飞 , 张鑫 , 王远征 , 张建忠 , 路明 , 王瑶 . 平衡式双解封注水封隔器的研制与应用[J]. 特种油气藏, 2024 , 31(5) : 155 -161 . DOI: 10.3969/j.issn.1006-6535.2024.05.018

Abstract

To address the issues of high unsealing load and short sealing validity period in the multi-stage injection string unsealing of highly deviated deep well in Jidong Oilfield,an equilibrium dual unseating water injection packer is developed through 3D simulation and optimization design of key structures based on the analysis of the packer structure.The packer is equipped with an independent dual unseating mode to minimize unseating load.It utilizes the spring and the pressure difference between the interior and exterior of the water injection string for automatic closing of the backwash valve.A combination of rubber extrusion and metal wire seating methods is employed to enhance the seating reliability of the backwash valve.High-strength fluorine rubber material has been selected to improve the temperature and pressure resistance of the rubber cylinder,while a equilibrium piston is designed to protect the unseating pin,eliminating the risk of premature unseating due to high pressure difference.The technology has been successfully deployed in 11 wells,achieving a flawless construction success rate of 100% and surpassing a seating validity period of 30 months.The unseating load of the lifting has been reduced by 17.2%.With an extended seating cycle and decreased unseating load,this packer effectively meets the long-term seating requirements for high-pressure separate injection in highly deviated deep wells,presenting promising economic benefits and application prospects.

Key words： highly deviated deep well; water injection packer; unseating load; seating validity; precise water injection

参考文献

[1] 肖国华,王金忠,宋显民,等.滩海人工岛大位移斜井多级分注配套管柱研究[J].石油机械,2011,39(11):40-43.
XIAO Guohua,WANG Jinzhong,SONG Xianmin,et al.Research on the matching string for the multi-stage separate injection in shallow sea artificial island large displacement inclined wells[J].China Petroleum Machinery,2011,39(11):40-43.
[2] 肖国华,宋显民,王瑶,等.南堡油田大斜度井分注工艺技术研究与应用[J].石油机械,2010,38(3):60-63.
XIAO Guohua,SONG Xianmin,WANG Yao,et al.Research and application of the separate injection technology in highly deviated wells in Nanpu Oilfield[J].China Petroleum Machinery,2010,38(3):60-63.
[3] 肖国华,付小坡,王金生,等.水平井预置速凝堵剂管外封串技术[J].特种油气藏,2018,25(12):136-139.
XIAO Guohua,FU Xiaopo,WANG Jinsheng,et al.External plugging with preset quick-setting plugging agent in horizontal well[J].Special Oil & Gas Reservoirs,2018,25(12):136-139.
[4] 王涛,申峰,杨超,等.延长探区古生界页岩气水平井一次上返高效封隔固井技术[J].非常规油气,2023,10(1):122-129.
WANG Tao,SHEN Feng,YANG Chao,et al.High-efficiency sealing and cementing technology of Paleozoic shale gas horizontal wells in Yanchang exploration area[J].Unconventional Oil & Gas,2023,10(1):122-129.
[5] 卢明,廖华林,武林娜,等.井下暂堵可取封隔器密封结构设计与评价[J].钻采工艺,2020,43(6):84-87.
LU Ming,LIAO Hualin,WU Linna,et al.Design and evaluation of sealing structure for downhole temporary plugging removable packer[J].Drilling & Production Technology,2020,43(6):84-87.
[6] 李建雄,户贵华,刘艳秋,等.分注管柱失效原因分析及治理对策探讨[J].石油机械,2009,37(2):66-70.
LI Jianxiong,HU Guihua,LIU Yanqiu,et al.Reason analysis and countermeasures for failure of separate injection string[J].China Petroleum Machinery,2009,37 (2):66-70.
[7] 潘勇,王娟,张权,等.深井高温高压储层新型分层改造工具研制与应用[J].钻采工艺,2020,43(5):71-74.
PAN Yong,WANG Juan,ZHANG Quan,et al.Development and application of a new layered reconstruction tool for deep well in high temperature and high pressure reservoir[J].Drilling & Production Technology,2020,43(5):71-74.
[8] 季公明,郭宏峰,杜晓霞,等.插入式封隔器注水管柱力学及蠕动规律研究[J].石油矿场机械,2021,50(3):1-7.
JI Gongming,GUO Hongfeng,DU Xiaoxia, et al.Study on dynamic mechanical analysis and creep law of insert sealed water injection pipe[J].Oil Field Equipment,2021,50(3):1-7.
[9] 肖国华,马宝忠,王金忠,等.JDY441可取式卡瓦封隔器的研制与应用[J].石油机械,2013,41(12):118-120.
XIAO Guohua,MA Baozhong,WANG Jinzhong,et al.Development and application of the JDY441 retrievable slip-type packer[J].China Petroleum Machinery,2013,41(12):118-120.
[10] 肖国华,王玲玲,邱贻旺,等.冀东油田套变井分注技术研究与应用[J].石油机械,2021,49(6):110-115.
XIAO Guohua,WANG Lingling,QIU Yiwang,et al.Research and application of separate zone injection technology for casing deformation wells in Jidong Oilfield[J].China Petroleum Machinery,2021,49(6):110-115.
[11] 刘宇飞,王金忠,张建忠,等.大斜度井分注管柱长效密封与安全起下技术[J].石油机械,2018,46(8) :69-74.
LIU Yufei,WANG Jinzhong,ZHANG Jianzhong,et al.Long-lasting sealing and safe tripping technology for separate layer injection string in highly deviated well[J].China Petroleum Machinery,2018,46(8):69-74.
[12] 董军锋.套变井长效分注工艺技术[J].内蒙古石油化工,2020,46(3):100-102.
DONG Junfeng.Technology of long-term separate injection in casing transformer well[J].Inner Mongolia Petrochemical Industry,2020,46(3):100-102.
[13] 王海全,肖国华,耿海涛.可重复坐封式大斜度井注水封隔器的研制和应用[J].特种油气藏,2013,20(3):147-150.
WANG Haiquan,XIAO Guohua,GENG Haitao.Development and application of repeatable setting packer for water injection in highly deviated wells[J].Special Oil & Gas Reservoirs,2013,20(3):147-150.
[14] 王金忠,肖国华,耿海涛,等.大斜度井多级分注工艺技术研究与应用[J].石油机械,2014,42(8):79-83.
WANG Jinzhong,XIAO Guohua,GENG Haitao,et al.Research and application of multistage layered water injection in highly deviated wells[J].China Petroleum Machinery,2014,42(8):79-83.
[15] 王海全,肖国华,张昊.JDY341X-110 大斜度井注水封隔器的研制和应用[J].石油钻采工艺,2012,34(4):119-121.
WANG Haiquan,XIAO Guohua,ZHANG Hao.Development and application of injection well packer for in highly deviated Well JDY341X-110[J].Oil Drilling & Production Technology,2012,34(4):119-121.
[16] 胡苗,冯利军,王军锋,等.延北113-133致密气藏水平井速度管柱安装策略研究[J].非常规油气,2022,9(2):85-93,105.
HU Miao,FENG Lijun,WANG Junfeng,et al.Study on velocity string installation strategy of horizontal well in Yanbei 113-133 tight gas reservoir[J].Unconventional Oil & Gas,2022,9(2):85-93,105.
[17] 赵杰,王玉环,李传乐,等.Y521-110 FQ防卡注水封隔器的研制及应用[J].石油机械,2013,41(1):82-84.
ZHAO Jie,WANG Yuhuan,LI Chuanle,et al.Development and application of the Y521-110 FQ anti-sticking water injection packer[J].China Petroleum Machinery,2013,41(1):82-84.
[18] 咸国旗,赵天浩,刘晋伟,等.防蠕动多功能封隔器的研制与应用[J].特种油气藏,2014,21(1):148-150.
XIAN Guoqi,ZHAO Tianhao,LIU Jinwei,et al.Development and application of anli-creep multi-function pucker[J].Special Oil & Gas Reservoirs,2014,21(1):148-150.
[19] 董奇玮.环形可调式分层注汽技术研究与应用[J].特种油气藏,2018,25(5):168-171.
DONG Qiwei.Annular adjustable layered steam injection and its application[J].Special Oil & Gas Reservoirs,2018,25(5):168-171.
[20] 张莹,张伟,汪坤.高温高压测试封隔器的改进[J].油气井测试,2022,31(6):11-16.
ZHANG Ying,ZHANG Wei,WANG Kun.Improvement of high temperature and high pressure testing packer[J].Well Testing,2022,31(6):11-16.

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献