塔河油田大排量稠油电泵优化与应用

宋正聪; 韩国庆; 谢翔

doi:10.3969/j.issn.1006-6535.2026.02.017

特种油气藏 >

2026 , Vol. 33 >Issue 2: 151 - 158

DOI: https://doi.org/10.3969/j.issn.1006-6535.2026.02.017

钻采工程

塔河油田大排量稠油电泵优化与应用

宋正聪 ,
韩国庆 ,
谢翔

展开

1.中国石油大学(北京),北京 102249;
2.中国石化西北油田分公司,新疆乌鲁木齐 830011;
3.中国石油西部钻探工程有限公司,新疆克拉玛依 834000

宋正聪(1986—),男,高级工程师,2010年毕业于西南石油大学勘查技术与工程专业,现为中国石油大学(北京)石油与天然气工程专业在读博士研究生,从事采油工艺及提高采收率方面的管理与研究工作。

收稿日期: 2024-12-26

修回日期: 2026-01-07

网络出版日期: 2026-07-30

基金资助

国家自然青年基金“致密油储层压裂后渗吸动用程度微观控制机理研究”(52204059)

收起

Optimization and application of high-flow-rate heavy-oil electric submersible pumps in the Tahe Oilfield

SONG Zhengcong ,
HAN Guoqing ,
XIE Xiang

Expand

1. China University of Petroleum(Beijing),Beijing 102249,China;
2. Sinopec Northwest Oilfield Company,Urumqi,Xinjiang 830011,China;
3. CNPC Xibu Drilling Engineering Co.,Ltd.,Karamay,Xinjiang 834000,China

Received date: 2024-12-26

Revised date: 2026-01-07

Online published: 2026-07-30

Fold

摘要

随着调流势技术在塔河油田的推广应用,大排量稠油电泵暴露出引接电缆烧毁、保护器失效故障率高的问题。为解决该问题,借助三维温度场有限元仿真分析方法,基于永磁电机拓扑结构和电机头部散热结构优化等措施,减少热量聚集,提升引接电缆耐温性能;通过物理隔离设计及迷宫型流道设计等方法,利用重油隔离液密度高、稳定性强的特点,设计带有动态“液体活塞”的重油保护器,实现稠油与胶囊腔的物理隔离,避免稠油直接接触引发保护器胶囊失效。通过电机及保护器的优化设计,提升大排量稠油电泵对调流势技术的适应性,为该技术在塔河油田的推广应用提供技术支撑。

关键词： 电泵; 永磁电机; 调流势技术; 稠油; 塔河油田

本文引用格式

宋正聪 , 韩国庆 , 谢翔 . 塔河油田大排量稠油电泵优化与应用[J]. 特种油气藏, 2026 , 33(2) : 151 -158 . DOI: 10.3969/j.issn.1006-6535.2026.02.017

Abstract

With the promotion and application of flow potential regulation technology in the Tahe Oilfield,high-flow-rate heavy-oil electric submersible pumps have exhibited high failure rates such as motor lead cable burnout and protector failure.To address these issues,a three-dimensional temperature-field finite element simulation method was applied.By optimizing the topology of permanent magnet motors and the heat-dissipation structure of motor heads,heat accumulation was reduced and temperature resistance of motor lead cables was improved.Through physical isolation design and labyrinth flow-path design,and leveraging the high density and strong stability of heavy-oil isolation fluids,a heavy-oil protector with a dynamic“liquid piston”was designed to achieve physical isolation between heavy oil and the capsule chamber,thus avoiding protector capsule failure caused by direct contact with heavy oil.Through optimization of the motor and protector designs,the adaptability of high-flow-rate heavy-oil electric submersible pumps to flow potential regulation technology was improved,providing technical support for promoting this technology in the Tahe Oilfield.

Key words： electric submersible pump; permanent magnet motor; flow potential regulation technology; heavy oil; Tahe Oilfield

参考文献

[1] 张希明,朱建国,李宗宇,等.塔河油田碳酸盐岩缝洞型油气藏的特征及缝洞单元划分[J].海相油气地质,2007,12(1):21-24.
ZHANG Ximing,ZHU Jianguo,LI Zongyu,et al.Ordovician carbonate fractured-vuggy reservoir in Tahe Oilfield,Tarim Basin:characteristics and subdivision of fracture-vug units[J].Marine Origin Petroleum Geology,2007,12(1):21-24.
[2] 张银涛,谢舟,袁敬一,等.塔里木盆地富满油田超深层碳酸盐岩储层裂缝测井识别——以果勒东Ⅰ区为例[J].断块油气田,2025,32(5):826-834.
ZHANG Yintao,XIE Zhou,YUAN Jingyi,et al.Fracture identification of ultra-deep carbonate reservoirs by logging in Fuman Oilfield,Tarim Basin:taking Guoledong Ⅰ Area as an example[J].Fault-Block Oil & Gas Field,2025,32(5):826-834.
[3] 余烨,张昌民,张尚锋,等.惠州凹陷新近系珠江组物源方向研究[J].断块油气田,2012,19(1):17-21.
YU Ye,ZHANG Changmin,ZHANG Shangfeng,et al.Research on source direction of Neogene Zhujiang Formation in Huizhou Depression[J].Fault-Block Oil & Gas Field,2012,19(1):17-21.
[4] 黄腾达,纪成,赵兵,等.超深碳酸盐岩储层岩石三轴压缩实验与数值模拟研究[J].断块油气田,2024,31(1):134-139.
HUANG Tengda,JI Cheng,ZHAO Bing,et al.Triaxial compression experiment of rocks and numerical simulation in ultra-deep carbonate reservoir[J].Fault-Block Oil & Gas Field,2024,31(1):134-139.
[5] 张弦,姜玉倩,杨潇,等.缝洞型碳酸盐岩油井抑漏堵水技术研究及现场试验[J].石油钻探技术,2025,53(4):123-129.
ZHANG Xian,JIANG Yuqian,YANG Xiao,et al.Research and field test of loss-control and water shut-off technology in vuggy-fractured carbonate oil wells[J].Petroleum Drilling Techniques,2025,53(4):123-129.
[6] 李宗田,涂畅,涂兴万.海外低渗碳酸盐岩油藏开发关键技术[J].断块油气田,2024,31(6):955-958.
LI Zongtian,TU Chang,TU Xingwan.Key technologies of overseas low-permeability carbonate reservoirs[J].Fault-Block Oil & Gas Field,2024,31(6):955-958.
[7] 李田靓,宋宏志,袁钟涛,等.海上稠油油藏水驱转热水复合驱增效效果实验研究[J].非常规油气,2025,12(4):49-54.
LI Tianliang,SONG Hongzhi,YUAN Zhongtao,et al.Experimental study on effect of hot water composite flooding after water floodingin offshore heavy oil reservoirs[J].Unconventional Oil & Gas,2025,12(4):49-54.
[8] 代玲,江任开,孙常伟,等.缝洞型碳酸盐岩油藏大漏失水平井颗粒吞吐控水技术[J].石油钻探技术,2024,52(3):91-97.
DAI Ling,JIANG Renkai,SUN Changwei,et al.Water control through particle huff and puff for horizontal wells with severe fluid loss in fractured-vuggy carbonate reservoirs[J].Petroleum Drilling Techniques,2024,52(3):91-97.
[9] 张国栋,何玉春,王雷,等.特低渗气藏储层间歇性泵抽和气垫联合作业取样技术[J].石油钻探技术,2025,53(3):169-174.
ZHANG Guodong,HE Yuchun,WANG Lei,et al.Intermittent pumping and air cushion combined operation sampling technology for ultra-low permeability gas reservoirs[J].Petroleum Drilling Techniques,2025,53(3):169-174.
[10] 吴艳,刘嘉祥,支龙飞,等.延安气田中区北部下古生界碳酸盐岩气藏高效上产关键技术研究及开发实践[J].非常规油气,2025,12(5):66-76.
WU Yan,LIU Jiaxiang,ZHI Longfei,et al.Research and development practice of key technologies for efficient production of Lower Paleozoic carbonate gas reservoirs in northern central area of Yan′an Gas Field[J].Unconventional Oil & Gas,2025,12(5):66-76.
[11] 杜春晖,仇鹤,陈小凡,等.基于数值模拟的流势分析技术在缝洞型油藏开发中的应用[J].油气藏评价与开发,2020,10(2):83-89.
DU Chunhui,QIU He,CHEN Xiaofan,et al.Application of flow potential analysis technique based on numerical simulation in the development of fractured-vuggy reservoir[J].Petroleum Reservoir Evaluation and Development,2020,10(2):83-89.
[12] 陈晋.缝洞型油藏流势调控方法及开发技术政策研究[D].北京:中国石油大学(北京),2022.
CHEN Jin.Study on flow potential control and development technology policy of fractured-vuggy reservoirs[D].Beijing:China University of Petroleum(Beijng),2022.
[13] 张俊斌,杨智迪,秦世利,等.海上大位移井单罐内双电动潜油泵技术[J].石油钻探技术,2025,53(2):46-51.
ZHANG Junbin,YANG Zhidi,QIN Shili,et al.Single-tank dual-electric submersible pump technology in offshore extended reach wells[J].Petroleum Drilling Techniques,2025,53(2):46-51.
[14] 张强,来鹏,王一兵,等.煤层气井有杆泵容粉能力实验研究[J].非常规油气,2025,12(5):106-116.
ZHANG Qiang,LAI Peng,WANG Yibing,et al.Experimental study on powder capacity of rod pump in coalbed methane wellbore[J].Unconventional Oil & Gas,2025,12(5):106-116
[15] 朱玉杰,胡亮,贾朋.连续管钻井电动定向器齿轮传动设计与试验[J].石油钻探技术,2025,53(2):97-106.
ZHU Yujie,HU Liang,JIA Peng.Design and testing of electric whipstock with gear transmission for coiled tubing drilling[J].Petroleum Drilling Techniques,2025,53(2):97-106.
[16] 毛红艳,任道成,李建波,等.延长高温电机轴承检修周期的试验研究[J].轴承,2008,44(12):25-27.
MAO Hongyan,REN Daocheng,LI Jianbo,et al.Experimental study on extending the overhaul interval of high-temperature motor bearings[J].Bearing,2008,44(12):25-27.
[17] 李哲.提高潜油电机性能的工艺研究与应用[D].东营:中国石油大学(华东),2007.
LI Zhe.Research and application of technology to improve the electric submersible motor[D].Dongying:China University of Petroleum(East China),2007.
[18] 梅思杰.潜油电泵技术[M].北京:石油工业出版社,2004:30-34.
MEI Sijie.Electric submersible pump technology[M].Beijing:Petroleum Industry Press,2004:30-34.
[19] BROWN K E.Overview of artificial lift systems[J].Journal of Petroleum Technology,1982,34(10):2384-2396.
[20] 王玉龙.高温潜油永磁同步电机的设计研究[D].沈阳:沈阳工业大学,2017.
WANG Yulong.High-temperature permanent-magnet submersible motor′s design and research[D].Shenyang:Shenyang University of Technology,2017.
[21] SUN Jianjun,MA Chenbo,LU Jianhua,et al.A leakage channel model for sealing interface of mechanical face seals based on percolation theory[J].Tribology International,2018,118:108-119.
[22] COCHAIN Jérémy,BRUNETIÈRE Noël,PARRY Andrew,et al.Experimental and numerical study of wavy mechanical face seals operating under pressure inversions[J].Proceedings of the Institution of Mechanical Engineers,Part J:Journal of Engineering Tribology,2020,234(2):247-260.
[23] 彭振华,张园,丁雯,等.塔河油田超深超稠油油藏人工举升技术[J].石油钻探技术,2018,46(4):85-91.
PENG Zhenhua,ZHANG Yuan,DING Wen,et al.Artificial lifting technology applied in ultra-deep & super-heavy oil reservoirs of the Tahe Oilfield[J].Petroleum Drilling Techniques,2018,46(4):85-91.
[24] 杜林辉,刘玉国,刘瑞,等.超稠油潜油电泵尾管装置的研制与应用[J].石油钻采工艺,2013,35(4):103-105.
DU Linhui,LIU Yuguo,LIU Rui,et al.Development and application of the tail pipe device for ultra-heavy oil submersible pump[J].Oil Drilling & Production Technology,2013,35(4):103-105.
[25] 李爽.大排量潜油电泵机组保护器改进设计[D].大庆:东北石油大学,2016.
LI Shuang.Optimized design for high flowrate protector of electric submersible pump[D].Daqing:Northeast Petroleum University,2016.
[26] 辛宏.小排量潜油直驱螺杆泵采油技术研究与应用[J].石油矿场机械,2018,47(1):76-80.
XIN Hong.Innovative ESPCP-direct drive with low flow rate technology and experience from field trials[J].Oil Field Equipment,2018,47(1):76-80.
[27] 徐涛,马增华,韩耀图,等.小直径潜油永磁同步电机温度场分析[J].石油矿场机械,2024,53(5):14-20.
XU Tao,MA Zenghua,HAN Yaotu,et al.Temperature field analysis of small diameter submersible permanent magnet synchronous machine[J].Oil Field Equipment,2024,53(5):14-20.
[28] 张信杰.潜油永磁同步电机温度场研究[D].青岛:中国石油大学(华东),2017.
ZHANG Xinjie.Study on the temperature field of the submersible permanent magnet synchronous motor[D].Qingdao:China University of Petroleum(East China),2017.
[29] 唐任远.现代永磁电机理论与设计[M].北京:机械工业出版社,2016:7-8.
TANG Renyuan.Modern theory and design of permanent magnet electrical machines[M].Beijing:China Machine Press,2016:7-8.
[30] 崔俊国,高翔,肖文生,等.基于田口法的钻井直驱永磁同步电机设计及优化[J].石油机械,2022,50(4):38-48.
CUI Junguo,GAO Xiang,XIAO Wensheng,et al.Design optimization of permanent magnet motor for direct-drive drilling based on Taguchi method[J].China Petroleum Machinery,2022,50(4):38-48.

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献