Distribution Characteristics of Residual Oil in Block III of District Ⅰ to District Ⅲ by Polymer Flooding and Its Comprehensive Management Strategies in Xingshugang Oilfield

doi:10.3969/j.issn.1006-6535.2024.04.015

Abstract

Abstract: The reservoirs with low permeability in the western part of Block Ⅲ of District Ⅰ to District Ⅲ in Xingshugang Oilfield in Daqing Oilfield experienced various development stages,such as natural energy,water flooding,and polymer flooding,leaving a complex distribution of residual oil and a pressing need to improve development efficiency.Therefore,Block Ⅲ was divided into three regions featured by:normal polymer flooding,casing-damaged polymer flooding,and polymer follow-up water flooding based on the study of residual oil and analysis results of development effectiveness,so as to develop proper technical strategies for improving development effectiveness with artificial core displacement and numerical simulation techniques.After years of chemical flooding,residual oil in the normal polymer flooding region is sporadically distributed at the edges of sand bodies and areas with low permeability.In the casing-damaged polymer flooding region,the producing performance of oil layers is poor due to casing damage,and the remaining oil reserves there is high.Based on the conditions described above,optimization is carried out in three aspects:development method,oil displacement system,and well pattern design with the full consideration of different regional characteristics.For normal polymer flooding regions and polymer subsequent water flooding regions,a five-spot well pattern dilution of regular polymer flooding was adopted with a well spacing of 175 meters and a plug size of 0.40 times of the pore volume.While for casing-damaged polymer flooding region,a local infilled five-spot well pattern of regular polymer flooding is applied with a well spacing of 140 meters and a plug size of 0.70 times of the pore volume.An increase of 3.53 percentage points is predicted in recovery rate.After the implementation of these measures,the cumulative injection of polymer pre-plugs in Block Ⅲ is estimated to be 0.10 times the pore volume,an expected oil increase of 9 780 tons.This study can provide reference for improving development efficiency in polymer flooding blocks.

Key words: polymer flooding, residual oil, enhanced oil recovery, physical analog, numerical simulation, comprehensive management

CLC Number:

TE343

Liang Peng. Distribution Characteristics of Residual Oil in Block III of District Ⅰ to District Ⅲ by Polymer Flooding and Its Comprehensive Management Strategies in Xingshugang Oilfield[J]. Special Oil & Gas Reservoirs, 2024, 31(4): 118-125.

References

[1] 孙龙德, 伍晓林, 周万富, 等.大庆油田化学驱提高采收率技术[J]. 石油勘探与开发, 2018, 45(4):636-645.
SUN Longde,WU Xiaolin,ZHOU Wanfu,et al.Technologies of enhancing oil recovery by chemical flooding in Daqing Oilfield, NE China[J].Petroleum Exploration and Development,2018,45(4):636-645.
[2] 廖广志, 王强, 王红庄, 等.化学驱开发现状与前景展望[J]. 石油学报, 2017, 38(2):196-207.
LIAO Guangzhi,WANG Qiang,WANG Hongzhuang,et al.Chemical flooding development status and prospect[J].Acta Petrolei Sinica,2017,38(2):196-207.
[3] 陈文林. 大庆油田四次采油凝胶颗粒+聚合物驱技术研究[J]. 特种油气藏, 2020, 27(5):106-112.
CHEN Wenlin.Research on gel particles + polymer flooding technology for quaternary oil recovery in Daqing Oilfield[J].Special Oil & Gas Reservoirs,2020,27(5):106-112.
[4] 雷锡岳, 曲占庆, 郝彤, 等. 聚合物驱后复合相态调驱体系提高采收率技术[J]. 特种油气藏, 2018, 25(2):143-147.
LEI Xiyue,QU Zhanqing,HAO Tong,et al.Composite profile-control flooding to enhance oil recovery after polymer flooding[J].Special Oil & Gas Reservoirs,2018,25(2):143-147.
[5] 焦天宇. 大庆长垣北部一类油层聚合物驱后化学驱变流线方式的井网优化[J].大庆石油地质与开发, 2022, 41(6):102-108.
JIAO Tianyu.Well pattern optimization of chemical flooding streamline changing mode after polymer flooding in ClassⅠreservoirs in northern Daqing Placanticline[J].Petroleum Geology & Oilfield Development in Daqing,2022,41(6):102-108.
[6] 赵秀娟, 左松林, 吴家文, 等. 大庆油田特高含水期层系井网重构技术研究与应用[J].油气地质与采收率, 2019, 26(4):82-87.
ZHAO Xiujuan,ZUO Songlin,WU Jiawen,et al.Study and application of strata & well pattern reconstruction technique at extra high water cut stage in Daqing Oilfield[J].Petroleum Geology and Recovery Efficiency,2019,26(4):82-87.
[7] 卢祥国, 曹豹, 谢坤, 等.非均质油藏聚合物驱提高采收率机理再认识[J].石油勘探与开发, 2021, 48(1):148-155.
LU Xiangguo,CAO Bao,XIE Kun,et al.EOR mechanisms of polymer flooding in a heterogeneous oil reservoir[J].Petroleum Exploration and Development,2021,48(1):148-155.
[8] 卢祥国, 何欣, 曹豹, 等.聚合物驱吸液剖面反转机制、应对方法及实践效果[J].石油学报, 2023, 44 (6): 962-974.
LU Xiangguo,HE Xin,CAO Bao,et al.Injection profile reversal mechanisms of polymer flooding and its countermeasures and practical effects[J].Acta Petrolei Sinica,2023,44(6):962-974.
[9] 宋国芬, 王春丽, 卢祥国.驱油剂与储层岩石作用及其对渗流特性影响[J]. 大庆石油地质与开发, 2017, 36(2):95-101.
SONG Guofen,WANG Chunli,LU Xiangguo.Actions between the oil displacing agents and reservoir rocks and influences on the flow characteristics[J].Petroleum Geology & Oilfield Development in Daqing,2017,36(2):95-101.
[10] 高建崇, 张楠, 王琳, 等.调剖、调驱剂注入压力对分流率的影响及作用机理[J]. 油田化学, 2021, 38(3):427-433.
GAO Jianchong,ZHANG Nan,WANG Lin,et al.Influence of injection pressure of profile control and displacement agent on diversion rate and its mechanism[J].Oilfield Chemistry,2021,38(3):427-433.
[11] 卢祥国, 郑凯亓, 罗锋, 等.聚合物类型、注液方式和层系组合方式对聚合物驱效果的影响实验[J]. 大庆石油地质与开发, 2023, 42(5):107-115.
LU Xiangguo,ZHENG Kaiqi,LUO Feng,et al.Experiment on influence of polymer type,injection mode and strata series combination mode on polymer flooding effect[J].Petroleum Geology & Oilfield Development in Daqing,2023,42(5):107-115.
[12] 朱焱, 高文彬, 李瑞升, 等.变流度聚合物驱提高采收率作用规律及应用效果[J].石油学报, 2018, 39 (2):189-200.
ZHU Yan,GAO Wenbin,LI Ruisheng,et al.Action laws and application effect of enhanced oil recovery by adjustable-mobility polymer flooding[J].Acta Petrolei Sinica,2018,39(2):189-200.
[13] 张卓,王正欣,薛国勤,等.中高渗胶结油藏聚合物驱后非均相复合驱技术[J].新疆石油地质,2021,42(4):475-479.
ZHANG Zhuo, WANG Zhengxin, XUE Guoqin, et al. Heterogeneous compound flooding technology for medium-high permeability consolidated reservoir after polymer flooding[J].Xinjiang Petroloeum Geology, 2021,42(4):475-479.
[14] 苏旭.聚合物驱多参数数值模拟自动历史拟合方法[J].油气地质与采收率,2022,29(5):102-110.
SU Xu.Automatic history matching method for multi-parameter numerical simulation of polymer flooding[J].Petroleum Geology and Recovery Efficiency,2022,29(5):102-110.

[1]	Yang Zhenwei, Liu Xiangjun, Xiong Jian. Damage Analysis of Bedding Shale under Ultrasonic Vibration Based on Discrete Element Simulation [J]. Special Oil & Gas Reservoirs, 2024, 31(4): 163-168.
[2]	Xiong Yu, Xiong Feng, Feng Pengxin, Lei Tingting, Wang Linghong. Condensate Water Output Mechanism and Production Prediction Method of HTHP Condensate Gas Reservoir in South China Sea [J]. Special Oil & Gas Reservoirs, 2024, 31(3): 116-122.
[3]	Wen Yuchen, Hou Jirui, Lou Zeyang, Pan Yinuo, Qu Ming. Study on Electronegative High-efficiency Polymer Degrading Agent and Field Pilot Test [J]. Special Oil & Gas Reservoirs, 2024, 31(3): 167-174.
[4]	Shi Kanyuan, Chen Junqing, Pang Xiongqi, Jiang Fujie, Pang Hong, Hui Shasha, Ma Kuiyou, Cong Qi. A Review of Methods for Measuring the Wettability of Reservoir Minerals [J]. Special Oil & Gas Reservoirs, 2024, 31(2): 1-9.
[5]	Liu Xiaoli, Li Yang, Bai Lei, Wu Congwen, Wang Hongbo, Ma Ting, Jiang Zhenxue, Wan Yunyang. Air-assisted microbial enhanced oil displacement in Thin Sandstone Reservoir with Edge and Bottom Water [J]. Special Oil & Gas Reservoirs, 2024, 31(2): 103-111.
[6]	Zhai Cheng, Wu Di, Qin Dongdong. Qrthogonal Numerical Simulation Study of the Reservoir Deformation Damage Induced by the Thermal Injection Decomposition of Natural Gas Hydrate [J]. Special Oil & Gas Reservoirs, 2024, 31(2): 112-119.
[7]	Zhou Zhijun, Zhang Qi, Yi Xi, Tang Jiaqi, Zhang Guoqing. Optimization of Lateral Morphology of SAGD Fishbone Multilateral Wells and Recovery Change Law [J]. Special Oil & Gas Reservoirs, 2024, 31(1): 57-65.
[8]	Li Songyan, Cheng Hao, Han Rui, Wei Yaohui, Li Minghe, Feng Shibo. Mechanism and Parameter Optimization of Thermal Solvent-Assisted Gravity Drainage Oil Recovery in Heavy Oil Reservoirs [J]. Special Oil & Gas Reservoirs, 2024, 31(1): 74-80.
[9]	ZhaoLin, Hao Li′na, Yu Chunsheng, Zhang Yong, Xiao Menghua, Chai Xiqiong, Yao Jiang, Gong Hengyuan. Research and Practice of Viscosity-Reducing Composite Flooding Technology for Conventional Heavy Oil Reservoirs [J]. Special Oil & Gas Reservoirs, 2024, 31(1): 94-100.
[10]	Yu Jianmei, Wei Tao, Du Dianfa, Ren Lichuan, Hao Fanghui. Diffusion Law of Thermochemical Oil Displacement System for Heavy Oil Reservoirs [J]. Special Oil & Gas Reservoirs, 2024, 31(1): 109-115.
[11]	Cheng Linsong, Yang Chenxu, Cao Renyi, Jia Pin, Pu Baobiao, Shi Junjie. Dynamic Characteristics and Numerical Simulation Research of Waterflood-induced Fractures [J]. Special Oil & Gas Reservoirs, 2023, 30(5): 84-90.
[12]	Zhang Yaxiong, Lyu Xinrui. Numerical Simulation Method of Large-Scale Discrete Fracture Dimensionality Reduction Based on Control Unit [J]. Special Oil & Gas Reservoirs, 2023, 30(5): 98-104.
[13]	Cui Chuanzhi, Wang Junkang, Wu Zhongwei, Sui Yingfei, Li Jing, Lu Shuiqingshan. Establishment and Application of Pressure Drive Dynamic Fracture Model for Tight Oil Reservoirs [J]. Special Oil & Gas Reservoirs, 2023, 30(4): 87-95.
[14]	Wu Jianfa, Zhu Weiyao, Zhang Deliang, Chen Zhen, Wu Tianpeng. Non-grid Numerical Simulation of Two-Phase Fluid-Solid Coupling for Shale Gas Reservoir [J]. Special Oil & Gas Reservoirs, 2023, 30(4): 96-103.
[15]	Song Baojian, Li Jingquan, Sun Yili, Zhang Wei, Liu Peng. Numerical Simulation Study on Parameters Optimization of CO₂ Huff-n-puffin Tight Reservoir [J]. Special Oil & Gas Reservoirs, 2023, 30(4): 113-121.