疏松砂岩油藏弱凝胶驱油井堵塞机制及技术对策

doi:10.3969/j.issn.1006-6535.2025.06.017

特种油气藏 ›› 2025, Vol. 32 ›› Issue (6): 141-149.DOI: 10.3969/j.issn.1006-6535.2025.06.017

疏松砂岩油藏弱凝胶驱油井堵塞机制及技术对策

高建崇^1,2, 刘义刚², 卢祥国¹, 刘进祥¹, 何欣¹, 孟鑫郅¹, 王玉卿¹, 黄文静¹

1.东北石油大学提高油气采收率教育部重点实验室,黑龙江大庆 163318;
2.中海石油中国有限公司天津分公司,天津 300451

收稿日期:2025-06-17 修回日期:2025-07-31 出版日期:2025-12-25 发布日期:2025-12-31
通讯作者: 刘进祥(1980—),男,副教授,2004年毕业于大庆石油学院应用化学专业,2013年毕业于东北石油大学石油与天然气工程专业,获博士学位,现主要从事提高油气采收率方面的教育和研究工作。
作者简介:高建崇(1979—),男,高级工程师,2003年毕业于西南石油学院石油工程专业,2024年毕业于东北石油大学油气田开发工程专业,获博士学位,现从事采油工程、增产增注措施和提高采收率技术研究管理工作。
基金资助:
中海石油天津分公司重点科技攻关项目“多组分液固融合高效低成本油水井治水技术研究与应用服务”(202512919494)

Plugging mechanism and technical countermeasures for weak gel flooding in unconsolidated sandstone reservoirs

GAO Jianchong^1,2, LIU Yigang², LU Xiangguo¹, LIU Jinxiang¹, HE Xin¹, MENG Xinzhi¹, WANG Yuqing¹, HUANG Wenjing¹

1. Key Laboratory for Improving Oil and Gas Recovery Northeast Petroleum University,Ministry of Education, Daqing, Heilongjiang 163318, China;
2. CNOOC China Tianjin Company, Tianjin 300451, China

Received:2025-06-17 Revised:2025-07-31 Online:2025-12-25 Published:2025-12-31

摘要/Abstract

摘要： 针对渤海L油田疏松砂岩油藏弱凝胶驱后期油井陆续发生堵塞的问题,开展了油井堵塞机理及解堵技术对策研究。结果表明:油井堵塞物中的水、原油重质组分、聚合物和无机物含量分别为63.99%、14.82%、14.48%和6.71%,无机物中CaCO₃、MgCO₃、SiO₂含量分别为60.00%、20.50%和13.00%,原油重质组分中烷烃、芳香烃、胶质、沥青质含量分别为13.78%、9.97%、32.84%、43.40%。海上平台空间狭小,使弱凝胶注入时大量未充分熟化的聚合物胶粒堆积筛管,后续缓慢熟化形成柔性胶冻体,运移中裹挟泥砂等形成多组分包裹体堵塞物,采出时受筛管和泵口作用再次堵塞。为解除现场堵塞优选出最佳解聚剂组合为“0.05%过硫酸钾+0.05%硫酸亚铁+0.10%柠檬酸”,有机溶剂组合为“30.00%柴油+20.00%二甲基亚砜+2.00%十二烷基硫酸钠+0.50%渗透剂”,溶垢剂组合为“10%盐酸+4%氢氟酸+1%缓蚀剂Lan826”。现场通过将解聚剂、有机溶剂和溶垢剂交替段塞式注入,有效解除了油井附近复合堵塞物,增液增油效果显著,日产液增幅为166.4%,日产油增幅为185.3%。该研究可为海上油田油井解堵提供借鉴。

关键词: 疏松砂岩, 弱凝胶驱, 堵塞物, 形成机理, 技术对策

Abstract: Aiming at the problem of successive plugging in oil wells during the late stage of weak gel flooding in the unconsolidated sandstone reservoir of Bohai L Oilfield, research on the plugging mechanism and plug removal technical countermeasures for weak gel flooding oil wells in this reservoir was carried out. The results indicate that the plugging material in oil wells consists of water, heavy components of crude oil, polymer and inorganic matter with contents of 63.99%, 14.82%, 14.48% and 6.71% respectively. Among the inorganic matter, the contents of CaCO₃, MgCO₃ and SiO₂ are 60.00%, 20.50% and 13.00% respectively.Among the heavy components of crude oil, the contents of alkanes, aromatic hydrocarbons, resins and asphaltenes are 13.78%, 9.97%, 32.84%, and 43.40% respectively. The limited space on offshore platforms causes a large amount of insufficiently matured polymer gel particles to accumulate on the screen during weak gel injection. These particles subsequently mature slowly to form flexible gel bodies, which entrain mud and sand during migration to form multi-component encapsulated plugging material. During production, they cause plugging again due to the constraints of the screen and pump inlets. To remove on-site plugging, the best depolymerizer combination "0.05% potassium persulfate + 0.05% ferrous sulfate + 0.10% citric acid", organic solvent combination "30.00% diesel oil + 20.00% dimethyl sulfoxide + 2.00% sodium dodecyl sulfate + 0.50% penetrant" and scale dissolver combination "10% hydrochloric acid + 4% hydrofluoric acid + 1% corrosion inhibitor Lan826" were preferentially selected. On site, by alternately injecting slugs of depolymerizer, organic solvent, and scale dissolver, the composite plugging material near the oil well was effectively removed, with significant liquid and oil increase performance. The daily liquid production increased by 166.4%, and the daily oil production increased by 185.3%. This research can provide reference for oil well plug removal in offshore oilfields.

Key words: unconsolidated sandstone, weak gel flooding, plugging material, formation mechanism, technical countermeasures

中图分类号:

TE358

高建崇, 刘义刚, 卢祥国, 刘进祥, 何欣, 孟鑫郅, 王玉卿, 黄文静. 疏松砂岩油藏弱凝胶驱油井堵塞机制及技术对策[J]. 特种油气藏, 2025, 32(6): 141-149.

GAO Jianchong, LIU Yigang, LU Xiangguo, LIU Jinxiang, HE Xin, MENG Xinzhi, WANG Yuqing, HUANG Wenjing. Plugging mechanism and technical countermeasures for weak gel flooding in unconsolidated sandstone reservoirs[J]. Special Oil & Gas Reservoirs, 2025, 32(6): 141-149.

参考文献

[1] XIE Kun,LU Xiangguo,LI Qiang,et al.Analysis of reservoir applicability of hydrophobically associating polymer[J].SPE Journal,2016,21(1):1-9.
[2] 吴晓燕,朱洪庆,张宁,等.锦州9-3油田二元复合驱产出表面活性剂的检测方法研究[J].油田化学,2014,31(3):457-460.
WU Xiaoyan,ZHU Hongqing,ZHANG Ning,et al.Detection method study on produced surfactant of binary system flooding in Jinzhou 9-3 Oilfield[J].Oilfield Chemistry,2014,31(3):457-460.
[3] 徐国瑞,鞠野,李翔,等.“堵水+调剖”联合作业效果及液流转向机理研究——以渤海SZ36-1油藏地质和流体条件为例[J].海洋石油,2017,37(1):30-36.
XU Guorui,JU Ye,LI Xiang,et al.Study on the effect of "water shut-off and profile control" combined operation and liquid diverting mechanism:a case study of SZ36-1 Reservoirs in Bohai Oilfield[J].Offshore Oil,2017,37(1):30-36.
[4] 邹剑,陈华兴,高尚,等.SZ36-1油田注聚井和聚驱受益油井堵塞物的组成及成因对比分析[J].石油与天然气化工,2019,48(5):77-82.
ZOU Jian,CHEN Huaxing,GAO Shang,et al.Comparisons of component and formation mechanism of blockages in polymer flooding injection well and response well in SZ36-1 Oilfield[J].Chemical Engineering of Oil & Gas,2019,48(5):77-82.
[5] 刘东,李丽,周承诗,等.注聚区油井防砂层堵塞原因与解堵措施[J].中国石油大学学报(自然科学版),2010,34(2):78-82.
LIU Dong,LI Li,ZHOU Chengshi,et al.Plugging mechanism and plug removing of sand control area in polymer injection well[J].Journal of China University of Petroleum(Edition of Natural Sciences),2010,34(2):78-82.
[6] 关德,杨寨,张勇,等.渤海两油田油井堵塞原因分析及化学解堵试验[J].西南石油学院学报,2002,24(2):35-37.
GUAN De,YANG Zhai,ZHANG Yong,et al.Diagnosis of reasons for oil well plugging and chemical remedial treatment tests at two oilfields in Bohai Bay[J].Journal of Southwest Petroleum Institute,2002,24(2):35-37.
[7] 蔡莹莹,陈小凯,曾双红,等.聚驱/调驱井解堵增注技术研究与应用[J].化学工程师,2017,31(5):60-63.
CAI Yingying,CHEN Xiaokai,ZENG Shuanghong,et al.Research and application of polymer broken down and water injectivity technology[J].Chemical Engineer,2017,31(5):60-63.
[8] 赵林,高申领,陈渊,等.砂岩油藏聚合物堵塞机理及解堵方法研究[J].特种油气藏,2022,29(3):156-161.
ZHAO Lin,GAO Shenling,CHEN Yuan,et al.Study on polymer plugging mechanism and plug removal method in sandstone reservoirs[J].Special Oil & Gas Reservoirs,2022,29(3):156-161.
[9] 陈超.渤海油田聚驱油井复合解堵体系及作用机理研究[D].青岛:中国石油大学(华东),2020.
CHEN Chao.Research on composite plug removal system and mechanism for polymer flooding wells in Bohai Oilfield[D].Qingdao:China University of Petroleum(East China),2020.
[10] 卢祥国,高振环,闫文华.人造岩心渗透率影响因素试验研究[J].大庆石油地质与开发,1994,13(4):53-55.
LU Xiangguo,GAO Zhenhuan,YAN Wenhua.Experimental study of factors influencing permeability of artificial core[J].Petroleum Geology & Oilfield Development in Daqing,1994,13(4):53-55.
[11] 卢祥国,宋合龙,王景盛.石英砂环氧树脂胶结非均质模型制作方法:200510063665.8[P].2005-09-07.
LU Xiangguo,SONG Helong,WANG Jingsheng.Manufacturing method for heterogeneous models with quartz sand epoxy resin cementation:200510063665.8[P].2005-09-07.
[12] 唐晓旭,高建崇,王秋霞,等.耐温抗盐高效聚合物微球性能评价与应用效果[J].油田化学,2022,39(3):425-430.
TANG Xiaoxu,GAO Jianchong,WANG Qiuxia,et al.Performance evaluation and application effect of high efficiency polymer microsphere with temperature and salt resistance[J].Oilfield Chemistry,2022,39(3):425-430.
[13] 符军放,刘克清,莫成孝,等.PESA与EDTMP复配剂用于油田硫酸钡锶垢阻垢研究[J].石油化工应用,2015,34(2):94-97.
FU Junfang,LIU Keqing,MO Chengxiao,et al.Study of combining PESA and EDTMP for inhibiting barium sulfate and strontium sulfate in oilfield[J].Petrochemical Industry Application,2015,34(2):94-97.
[14] 于洪江,肖志海.DTPA对BaSO₄垢清除作用影响因素研究[J].油田化学,2015,32(3):427-430.
YU Hongjiang,XIAO Zhihai.Study on influence factors of clearance function of DTPA on BaSO₄ scale[J].Oilfield Chemistry,2015,32(3):427-430.
[15] 潘恒民,孙庆宏,王鑫,等.大庆外围油田油水井清防垢技术[J].油田化学,2005,22(2):119-121.
PAN Hengmin,SUN Qinghong,WANG Xin,et al.Reservoir precipitates removal and prevention in water injection and oil production wells at peripheral oil fields of Daqing[J].Oilfield Chemistry,2005,22(2):119-121.
[16] 孙金声,杨景斌,白英睿,等.超分子凝胶形成机理及其在油气钻采工程领域应用现状和前景[J].石油学报,2020,43(9):1334-1350.
SUN Jinsheng,YANG Jingbin,BAI Yingrui,et al.Formation mechanism of supramolecular gel and its application status and prospect in the field of oil and gas drilling and production engineering[J].Acta Petrolei Sinica,2020,43(9):1334-1350.
[17] 张宝岩,卢祥国,谢坤,等.Cr³⁺聚合物凝胶与水交替注入调驱效果和机理分析——以渤海油田储层条件为例[J].石油化工高等学校学报,2016,29(1):35-40.
ZHANG Baoyan,LU Xiangguo,XIE Kun,et al.Profile control and flooding effect of alternate injection of Cr³⁺ polymer gel and water and its mechanism analysis:taking the Bohai Oilfield as an example[J].Journal of Petrochemical Universities,2016,29(1):35-40.
[18] 刘义刚,张云宝,谢坤,等.Cr³⁺聚合物凝胶与水交替注入调驱作用机理——以渤海LD10-1油田为例[J].断块油气田,2017,24(2):251-254.
LIU Yigang,ZHANG Yunbao,XIE Kun,et al.Profile control and flooding effect of alternative injection of Cr³⁺ polymer gel and water and its mechanism:taking Bohai LD10-1Oilfield as an example[J].Fault-Block Oil & Gas Field,2017,24(2):251-254.
[19] 卢祥国,王伟.Al³⁺交联聚合物分子构型及其影响因素[J].物理化学学报,2006,2(5):631-634.
LU Xiangguo,WANG Wei.The molecular configuration and its influential factors of Al³⁺ cross-linked polyacrylamide gel[J].Acta Physico-Chimica Sinica,2006,2(5):631-634.
[20] 卢祥国,王晓燕,李强,等.高温高矿化度条件下驱油剂中聚合物分子结构形态及其在中低渗油层中的渗流特性[J].化学学报,2010,68(12):1229-1234.
LU Xiangguo,WANG Xiaoyan,LI Qiang,et al.The polymer molecular configuration in the oil displacement agent with high temperature and salinity and its seepage property in the medium-low permeability layer[J].Acta Chimica Sinica,2010,68(12):1229-1234.
[21] 舒政,陶刚,赵文森,等.海上平台提高母液配制浓度减小配注系统总体积的可行性分析[J].中国海上油气,2018,30(5): 123-130.
SHU Zheng,TAO Gang,ZHAO Wensen,et al.Feasibility analysis on reducing the total volume of injection allocation system by increasing the concentration of mother liquor on offshore platform[J].China Offshore Oil and Gas,2018,30(5): 123-130.
[22] 左清泉,孟祥海,陈士佳,等.海上油田速溶聚合物调驱体系室内实验研究[J].石油化工应用,2017,36(6):133-136,152.
ZUO Qingquan,MENG Xianghai,CHEN Shijia,et al.The indoor experimental study of instant polymer displacement system in offshore oilfield[J].Petrochemical Industry Application,2017,36(6):133-136,152.
[23] 陈文娟,赵文森,张健.海上油田聚合物溶液高效配制方法研究[J].油气田地面工程,2017,36(5):20-23.
CHEN Wenjuan,ZHAO Wensen,ZHANG Jian.Research on the efficient preparation method of the polymer solution in offshore oilfields[J].Oil-Gas Field Surface Engineering,2017,36(5):20-23.

疏松砂岩油藏弱凝胶驱油井堵塞机制及技术对策

Plugging mechanism and technical countermeasures for weak gel flooding in unconsolidated sandstone reservoirs

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	尹彬, 董长银, 李高峰, 任世君, 李冲, 刘有闯, 李振东, 李娜. 疏松砂岩储层近井防砂区域压降评价与参数优化[J]. 特种油气藏, 2025, 32(6): 150-157.
[2]	陈洪才, 王昭凯, 金忠康, 王腾, 孙永鹏, 赵光. 中低渗砂岩油藏水驱后期油藏再评价及提高采收率对策[J]. 特种油气藏, 2024, 31(4): 133-141.
[3]	许国民, 高忠敏. 疏松砂岩油藏化学驱技术研究与试验[J]. 特种油气藏, 2020, 27(6): 139-144.
[4]	赵文龙, 韩春元, 严梦颖, 乔博, 罗静, 薛辉, 郭惠平. 冀中坳陷北部奥陶系储层形成机理与分布模式[J]. 特种油气藏, 2020, 27(5): 61-67.
[5]	武毅. 辽河油田开发技术思考与建议[J]. 特种油气藏, 2018, 25(6): 96-.
[6]	马帅，黄静，张风波，王雯娟，王世朝. 南海西部低渗疏松砂岩油藏水平井合理生产压差研究[J]. 特种油气藏, 2018, 25(2): 138-.
[7]	王铭显，范子菲，罗万静，宋珩，丁杰. 多层疏松砂岩气藏动态储量计算误差分析[J]. 特种油气藏, 2017, 24(6): 100-106.
[8]	张萌，林会喜. 春晖油田石炭系火成岩储层特征及形成机理[J]. 特种油气藏, 2016, 23(5): 52-.
[9]	房　媛，汤达祯，许　浩，王　凯，喻廷旭. 南翼山油田浅层低压油气藏形成机理[J]. 特种油气藏, 2014, 21(5): 24-.
[10]	温庆志，徐希，王杏尊，黄越，黄杰. 低渗透疏松砂岩纤维压裂技术[J]. 特种油气藏, 2014, 21(2): 131-.
[11]	徐波. 泌阳凹陷泌浅10区剩余油分布特征与开发技术对策[J]. 特种油气藏, 2013, 20(1): 83-88.
[12]	梁丹曾祥林房茂军. 适度出砂井产能评价及影响因素分析[J]. , 2012, 19(5): 1-.
[13]	刘正伟. 海上疏松砂岩油藏出砂预测模型及应用[J]. , 2012, 19(3): 1-.
[14]	许国民. 疏松砂岩油藏二次开发方式研究与实践[J]. , 2012, 19(2): 1-.
[15]	房茂军曾祥林梁丹. 疏松砂岩油藏出砂机理微观可视化实验研究[J]. , 2012, 19(1): 1-.