火驱过程中稠油组分变化特征研究

doi:10.3969/j.issn.1006-6535.2021.04.013

特种油气藏 ›› 2021, Vol. 28 ›› Issue (4): 96-101.DOI: 10.3969/j.issn.1006-6535.2021.04.013

火驱过程中稠油组分变化特征研究

蒋海岩^1,2, 李天月^1,2, 杜坤³, 袁士宝^1,2, 张喻鹏⁴

1.西安石油大学,陕西西安 710065;
2.陕西省油气田特种增产技术重点实验室,陕西西安 710065;
3.中国石油长庆油田分公司,甘肃庆城 745100;
4.中国石油塔里木油田分公司,新疆库尔勒 841000

收稿日期:2020-07-23 修回日期:2021-05-27 发布日期:2022-02-18
作者简介:蒋海岩(1978—),女,教授,2001年毕业于石油大学(华东)石油工程专业,2006年毕业于中国石油大学(华东)油气田开发工程专业,获博士学位,现从事提高采收率机理研究工作。
基金资助:
国家自然科学基金“基于燃料沉积演化机制的火烧油层启动与控制”(51674198)、“基于边界元方法的致密油藏体积压裂水平井多尺度、多机理耦合流动模型研究”(51804258);西安石油大学研究生创新与实践能力培养计划立项项目“火驱过程中稠油组分变化特征”(YCS20213140)

Study on the Characteristics of Changes in Heavy Oil Components during In-Situ Combustion

Jiang Haiyan^1,2, Li Tianyue^1,2, Du Kun³, Yuan Shibao^1,2, Zhang Yupeng⁴

1. Xi'an Shiyou University, Xi'an, Shaanxi 710065, China;
2. Shaanxi Key Laboratory of Advanced Stimulation Technology for Oil and Gas Reservoirs, Xi'an, Shaanxi 710065, China;
3. PetroChina Changqing Oilfield Company, Qingcheng, Gansu 745100, China;
4. PetroChina Tarim Oilfield Company, Korla, Xinjiang 841000, China

Received:2020-07-23 Revised:2021-05-27 Published:2022-02-18

摘要/Abstract

摘要： 针对火驱过程中稠油组分变化复杂的问题,基于CMG-WinProp模块,研究火驱过程中不同区带间的稠油组分变化特征。研究结果表明:燃烧带主要发生高温氧化反应,重质组分裂解为轻质组分;结焦带轻质组分聚合生焦转变为重质组分;油墙区主要富集燃烧反应后的轻质油。相图变化表现为随着火驱燃烧反应的进行,油藏温度逐渐升高,气液两相区面积逐渐增大,随轻质组分含量的增多相图临界点向左上方移动。研究结果对进一步认识稠油热采过程中的组分变化规律具有十分重要的意义。

关键词: 火烧油层, 稠油热采, 组分迁移, 相态变化

Abstract: In view of the complicated changes in heavy oil components during in-situ combustion, the characteristics of changes in heavy oil components between different zones in the in-situ combustion were studied based on CMG-WinProp module. The results of the study showed that the heavy components were cracked into light components by high-temperature oxidation reaction in the combustion zone; the light components were polymerized and converted into heavy components in the coking zone; the light oil after combustion reaction was mainly accumulated in the oil bank zone. The change of the phase diagram showed that with the progress of in-situ combustion, the reservoir temperature was gradually increased, the gas-liquid area was gradually widened, and the critical point of phase diagram moved to the upper left with the increase of light component content. The study results are of great significance for further understanding the laws of component changes in the thermal recovery of heavy oil.

Key words: in-situ combustion, thermal recovery of heavy oil, component migration, phase change

中图分类号:

TE345

蒋海岩, 李天月, 杜坤, 袁士宝, 张喻鹏. 火驱过程中稠油组分变化特征研究[J]. 特种油气藏, 2021, 28(4): 96-101.

Jiang Haiyan, Li Tianyue, Du Kun, Yuan Shibao, Zhang Yupeng. Study on the Characteristics of Changes in Heavy Oil Components during In-Situ Combustion[J]. Special Oil & Gas Reservoirs, 2021, 28(4): 96-101.

参考文献

[1] 蒋海岩,袁士宝,李杨,等.稠油氧化阶段划分及活化能的确定[J].西南石油大学学报(自然科学版),2016,38(4):136-142.
JIANG Haiyan,YUAN Shibao,LI Yang,et al.Division of oxidation stage of heavy oil in the process of in-situ combustion[J].Journal of Southwest Petroleum University(Science & Technology Edition),2016,38(4):136-142.
[2] SEQUERA B,MOORE R G,MEHTA S A,et al.Numerical simulation of in situ combustion experiments operated under low temperature conditions[J].Journal of Canadian Petroleum Technology,2010,49(1):55-64.
[3] 文萍,崔敏,李传,等.塔里木稠油及其组分中元素的分布和红外光谱分析[J].石油化工高等学校学报,2013,26(6):16-21.
WEN Ping,CUI Min,LI Chuan,et al.Element distribution and infrared spectrum analysis in Tarim heavy oils and their sub-fractions[J].Journal of Petrochemical Universities,2013,26(6):16-21.
[4] 李士伦.天然气工程[M].北京:石油工业出版社,2000:67-68.
LI Shilun.Gas Engineering[M].Beijing:Petroleum Industry Press,2000:67-68.
[5] YUAN S,JIANG H, SHI Y,et al.Study on heavy oil components transformation path based on core analysis during in-situ combustion process[J].Fuel,2019,253(4):72-78.
[6] 张鸿.普通稠油火烧油层高温氧化反应动力学研究[J].石油化工应用,2014,33(4):99-101.
ZHANG Hong.Study on reaction kinetics of high-temperature oxidation of in-situ combustion in ordinary heavy oil[J].Petrochemical Industry Application,2014,33(4):99-101.
[7] 李金涛. 火烧油层过程中原油的热解动力学特征研究[D].青岛:中国石油大学(华东),2015.
LI Jintao.Study on pyrolysis kinetics characteristics of crude oil in in-situ combustion process[D].Qingdao:China University of Petroleum(East China),2015.
[8] 秦佳,周亚玲,王清华,等.注空气轻质原油低温氧化油气组分变化研究[J].大庆石油地质与开发,2008,27(5):111-113.
QIN Jia,ZHOU Yaling,WANG Qinghua,et al.Study on hydrocarbon composition variation through low temperature oxidation of injected air and light crude oil[J].Petroleum Geology & Oilfield Development in Daqing,2008,27(5):111-113.
[9] ZHAO R,ZHANG C,YANG F,et al.Influence of temperature field on rock and heavy components variation during in-situ combustion process[J].Fuel,2018,230(5):244-257.
[10] YUAN S,JIANG H,YANG F,et al.Research on characteristics of fire flooding zones based on core analysis[J].Journal of Petroleum Science and Engineering,2018,170(7):607-610.
[11] 梁建军,计玲,蒋西平,等.克拉玛依油田红浅火驱先导试验区火驱开发节能效果[J].新疆石油地质,2017,38(5):599-601.
LIANG Jianjun,JI Ling,JIANG Xiping,et al.Energy-saving effect of fireflooding development in Hongqian pilot test area of Karamay Oilfield[J].Xinjiang Petroleum Geology,2017,38(5):599-601.
[12] 石何武,白跃华,董卫刚,等.原油虚拟组分划分方法浅析[J].炼油技术与工程,2009,39(9):61-64.
SHI Hewu,BAI Yuehua,DONG Weigang,et al.Analysis on characterization of pseudo-components of crude oil[J].Petroleum Refinery Engineering,2009,39(9):61-64.
[13] 刘海,潘一,冷俊.国内外火烧油层研究进展与应用[J].当代化工,2015,44(3):545-547.
LIU Hai,PAN Yi,LENG Jun.Research progress and application of the in-situ combustion technology at home and aboard[J].Contemporary Chemical Industry,2015,44(3):545-547.
[14] 唐小强,黄光辉,张敏,等.原油及其族组分裂解过程中产物组成变化特征[J].成都理工大学学报(自然科学版),2011,38(1):21-28.
TANG Xiaoqiang,HUANG Guanghui,ZHANG Min,et al.Comp
osition characteristics of products in the process of cracking of crude oil and oil fractions[J].Journal of Chengdu University of Technology(Science & Technology Edition),2011,38(1):21-28.
[15] 蒋海岩,王姣,赵黎明,等.基于动力学参数的火驱效果影响分析[J].科学技术与工程,2020,20(14):5589-5597.
JIANG Haiyan,WANG Jiao,ZHAO Liming, et al.Analysis of in-situ combustion effect based on dynamic parameters[J].Science Technology and Engineering,2020,20(14):5589-5597.
[16] 赵睿智,陈明贵,高飞,等.厚层稠油油藏直平组合火驱优化[J].断块油气田,2020,27(2):233-237.
ZHAO Ruizhi,CHEN Minggui,GAO Fei,et al.In-situ combustion optimization of vertical and horizontal wells combination for heavy oil reservoirs with thick layer[J].Fault-Block Oil & Gas Field,2020,27(2):233-237.
[17] 滕建彬,刘惠民,邱隆伟,等.济阳坳陷页岩油储层物质组分对含油性的控制规律[J].油气地质与采收率,2019,26(1):80-87.
TENG Jianbin,LIU Huimin,QIU Longwei,et al.Control law of material components of shale oil reservoir on oil-bearing characteristics in Jiyang Depression [J].Petroleum Geology and Recovery Efficiency,2019,26(1):80-87.
[18] 吴春洲,张伟,孙永涛,等.耐温防乳驱油体系辅助稠油热采研究与应用[J].断块油气田,2020,27(3):365-369.
WU Chunzhou,ZHANG Wei,SUN Yongtao,et al.Study and application of oil displacement system of temperature resistant and anti-emulsion surfactant to assist heavy oil thermal recovery[J].Fault-Block Oil & Gas Field,2020,27(3):365-369.
[19] 周雪晴,张占松,张超谟,等.基于矿物组分和成岩作用的致密砂岩储层脆性评价方法——以鄂尔多斯盆地东北部某区块为例[J].油气地质与采收率,2017,24(5):10-16.
ZHOU Xueqing,ZHANG Zhansong,ZHANG Chaomo,et al.A new brittleness evaluation method for tight sandstone reservoir based on mineral compositions and diagenesis:a case study of a certain block in the northeastern Ordos Basin[J].Petroleum Geology and Recovery Efficiency,2017,24(5):10-16.
[20] 王诗灏.特深层稠油油藏火驱可行性 [J].大庆石油地质与开发,2019,38(6):83-89.
WANG Shihao. Feasibility of the fire flooding in the extra-deep heavy oil reservoirs[J].Petroleum Geology & Oilfield Development in Daqing,2019,38(6):83-89.
[21] 杨智,廖静,高成国,等.红浅1井区直井火驱燃烧区带特征 [J].大庆石油地质与开发,2019,38(1):89-93.
YANG Zhi,LIAO Jing, GAO Chengguo,et al.Characteristics of the in situ combustion zone for the vertical well in Well Block HQ1[J].Petroleum Geology & Oilfield Development in Daqing,2019,38(1):89-93.

火驱过程中稠油组分变化特征研究

Study on the Characteristics of Changes in Heavy Oil Components during In-Situ Combustion

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李爱芬, 高子恒, 景文龙, 付帅师. 基于CT扫描的蒸汽驱岩心孔隙结构特征及相渗分析[J]. 特种油气藏, 2023, 30(1): 79-86.
[2]	王国栋. 稠油热采伴生气物质来源及影响因素[J]. 特种油气藏, 2022, 29(3): 64-68.
[3]	李宗锟. 稠油热采井套管损坏机理及套管挂片技术实验[J]. 特种油气藏, 2021, 28(2): 171-174.
[4]	冷冰. 火驱同心双管分层注气管柱研制及试验[J]. 特种油气藏, 2020, 27(4): 149-155.
[5]	宋志军, 汪泓, 张铭, 张晨剑, 张明波. 高温井下温压数据声传直读监测技术[J]. 特种油气藏, 2020, 27(4): 163-167.
[6]	霍进, 吕柏林, 杨兆臣, 卢迎波, 胡鹏程. 稠油油藏多元介质复合蒸汽吞吐驱油机理研究 [J]. 特种油气藏, 2020, 27(2): 93-97.
[7]	高岳，姜瑞忠，崔永正，张春光，潘红. 牛顿流体-幂律流体双区复合稠油油藏水平井热采试井模型[J]. 特种油气藏, 2019, 26(4): 113-.
[8]	方舟，张彩旗，罗义科，吴金涛，屈继峰. 基于模糊数学的海上稠油热采效果评价研究及应用[J]. 特种油气藏, 2018, 25(1): 129-.
[9]	刘新光，王磊，田冀，谭先红，李卓林. 海上稠油油田火烧油层数值模拟[J]. 特种油气藏, 2016, 23(6): 93-.
[10]	董长银，张清华，郑华安，董云彬，何海峰. 稠油热采防砂井动态产能评价方法及其应用[J]. 特种油气藏, 2016, 23(6): 123-.
[11]	刘新光，田冀，李娜，王磊，蔡柳. 海上稠油热采开发经济界限研究[J]. 特种油气藏, 2016, 23(3): 106-.
[12]	孙逢瑞，黄世军，邹明. 过热蒸汽吞吐水平井产能评价模型[J]. 特种油气藏, 2016, 23(3): 122-.
[13]	刘　利，张福兴，杨显志，于晓聪，张成博. 火驱移动式电点火技术研究[J]. 特种油气藏, 2014, 21(6): 130-.
[14]	赵修太，付敏杰，王增宝，董林燕，唐金玉. 稠油热采调堵体系研究进展综述[J]. 特种油气藏, 2013, 20(4): 1-4.
[15]	黄颖辉，刘东，罗义科. 海上多元热流体吞吐先导试验井生产规律研究[J]. 特种油气藏, 2013, 20(2): 84-86.